Rotary Hearth Furnace Refractories - Resco Products

Rotary Hearth Furnace

Resco Products is a manufacturer of high quality refractory products for rotary hearth furnaces. The walls and roof of the furnace are stationary while the hearth moves circular on rollers carrying the material. During this process heated gas moves in the opposite direction as temperatures reach 1300°C. Ensuring the right refractory products are installed gives you the ability to withstand the changes in temperature, pressure, and provides you reduced heat loss compared to a bogie furnace.

Your Resco rotary hearth furnace specialist will evaluate your procedures and conditions to recommend the right refractory and insulating materials. Our specialist will recommend the best solutions to ensure the product lasts through more cycles while reducing heat loss through.

For the rotary hearth furnace application Resco Products commonly sells Rescobond 3000G, Kricon 28, Rescocast 3, Vibrocast 50 and more.

 
 
RELATED PRODUCTS
Plastic

CorlineArrow icon

CORLINE® was designed for linings exposed to extreme erosion environments in heat enclosures of the oil refining, petrochemical, gas processing and solid fuels processing industries. CORLINE® is a High Alumina, Chemically Bonded, Erosion Resistant Refractory.
PDS SDS
CORLINE® was designed for linings exposed to extreme erosion environments in heat enclosures of the oil refining, petrochemical, gas processing and solid fuels processing industries. CORLINE® is a High Alumina, Chemically Bonded, Erosion Resistant Refractory.
RAM

Corpatch 50 MSArrow icon

CORPATCH® 50-MS is an 50% alumina patching mix. It is an all purpose patching mix that is tough enough to be one of the best erosion or abrasion resistant refractory lining materials available today, yet it is pliable enough to be installed and shaped by hand or mallet.
PDS SDS
CORPATCH® 50-MS is an 50% alumina patching mix. It is an all purpose patching mix that is tough enough to be one of the best erosion or abrasion resistant refractory lining materials available today, yet it is pliable enough to be installed and shaped by hand or mallet.
RAM

Corpatch 80Arrow icon

CORPATCH® 80 is an 80% alumina patching mix. It is an all purpose patching mix that is tough enough to be one of the best erosion or abrasion resistant refractory lining materials available today, yet it is pliable enough to be installed and shaped by hand or mallet.
PDS SDS
CORPATCH® 80 is an 80% alumina patching mix. It is an all purpose patching mix that is tough enough to be one of the best erosion or abrasion resistant refractory lining materials available today, yet it is pliable enough to be installed and shaped by hand or mallet.
RAM

Corpatch 80 MSArrow icon

CORPATCH® 80-MS is an 80% alumina patching mix. It is an all purpose patching mix that is tough enough to be one of the best erosion or abrasion resistant refractory lining materials available today, yet it is pliable enough to be installed and shaped by hand or mallet.
PDS SDS
CORPATCH® 80-MS is an 80% alumina patching mix. It is an all purpose patching mix that is tough enough to be one of the best erosion or abrasion resistant refractory lining materials available today, yet it is pliable enough to be installed and shaped by hand or mallet.
Conventional Castable

EZ Cast 2700Arrow icon

EZ CAST® 2700 is a general purpose, economical castable designed for applications up to 2700°F. Its high strength and ability to be pumped or poured make it the ideal choice for any number of applications where access is limited or obstructions make work difficult. It is particularly effective in applications where destructive gases and atmospheres or excessive wear shorten refractory life.
PDS SDS
EZ CAST® 2700 is a general purpose, economical castable designed for applications up to 2700°F. Its high strength and ability to be pumped or poured make it the ideal choice for any number of applications where access is limited or obstructions make work difficult. It is particularly effective in applications where destructive gases and atmospheres or excessive wear shorten refractory life.
Conventional Castable

EZ Cast 2800Arrow icon

EZ CAST® 2800 is similar to EZ CAST® 2700, except designed for applications up to 2800°F. In the laboratory, this product has tested well for resistance to CO (carbon monoxide) disintegration encountered in coke ovens and blast furnaces.
PDS SDS
EZ CAST® 2800 is similar to EZ CAST® 2700, except designed for applications up to 2800°F. In the laboratory, this product has tested well for resistance to CO (carbon monoxide) disintegration encountered in coke ovens and blast furnaces.
Conventional Castable

EZ Cast 2800 FineArrow icon

EZ CAST® 2800 FINE is a Fine-Grained, Conventional Cement, 45% Alumina castable that can be installed by vibration cast, pumpcasting, or self-leveling methods.
PDS SDS
EZ CAST® 2800 FINE is a Fine-Grained, Conventional Cement, 45% Alumina castable that can be installed by vibration cast, pumpcasting, or self-leveling methods.
Low Cement Castable

EZ Cast 3000Arrow icon

EZ CAST® 3000 is a self-flowing, low iron, 56% alumina, low cement castable designed to provide high strength and good thermal shock and abrasion resistance. It offers good slag resistance for severe applications up to 3000°F. In the laboratory, this product has shown excellent resistance to CO atmospheres found in coke ovens and blast furnaces. Large volumes of this castable have been used successfully in a wide variety of applications.
PDS SDS
EZ CAST® 3000 is a self-flowing, low iron, 56% alumina, low cement castable designed to provide high strength and good thermal shock and abrasion resistance. It offers good slag resistance for severe applications up to 3000°F. In the laboratory, this product has shown excellent resistance to CO atmospheres found in coke ovens and blast furnaces. Large volumes of this castable have been used successfully in a wide variety of applications.
Low Cement Castable

EZ Cast 3200Arrow icon

EZ CAST® 3200 is a self-flowing, 76% alumina low cement castable designed to provide longer service life and superior performance in steel applications with temperatures up to 3200°F. It also has outstanding strength and abrasion resistance. In laboratory testing this product has shown excellent resistance to CO atmospheres found in coke ovens and blast furnaces.
PDS SDS
EZ CAST® 3200 is a self-flowing, 76% alumina low cement castable designed to provide longer service life and superior performance in steel applications with temperatures up to 3200°F. It also has outstanding strength and abrasion resistance. In laboratory testing this product has shown excellent resistance to CO atmospheres found in coke ovens and blast furnaces.
Low Cement Castable

EZ Cast 3250Arrow icon

EZ CAST® 3250 is a low cement castable with an alumina content of 78%. It has excellent abrasion resistance and superior hot strength to as high as 2700°F. These properties combined with excellent thermal shock resistance have resulted in many successful installations in bottoms and lip rings of steel ladles. This proven product has been successfully used in a wide variety of applications, often substituted for higher alumina content products, making it a highly cost-effective and versatile composition. Its combination of strength, toughness, alumina content, and other compositional features make it an excellent product for many applications.
PDS SDS
EZ CAST® 3250 is a low cement castable with an alumina content of 78%. It has excellent abrasion resistance and superior hot strength to as high as 2700°F. These properties combined with excellent thermal shock resistance have resulted in many successful installations in bottoms and lip rings of steel ladles. This proven product has been successfully used in a wide variety of applications, often substituted for higher alumina content products, making it a highly cost-effective and versatile composition. Its combination of strength, toughness, alumina content, and other compositional features make it an excellent product for many applications.
Conventional Castable

EZ Cubed 2700Arrow icon

EZ CUBED® 2700 is a conventional cement-bonded, fireclay-based, 42% Alumina castable that can be installed by vibration cast , pumpcasting, self-leveling, or shotcreting methods.
PDS SDS
EZ CUBED® 2700 is a conventional cement-bonded, fireclay-based, 42% Alumina castable that can be installed by vibration cast , pumpcasting, self-leveling, or shotcreting methods.
Conventional Castable

EZ Cubed 2800Arrow icon

EZ CUBED® 2800 is a cement-bonded, fireclay-based, 45% Alumina castable that can be installed by vibration cast , pumpcasting, self-leveling, or shotcreting methods.
PDS SDS
EZ CUBED® 2800 is a cement-bonded, fireclay-based, 45% Alumina castable that can be installed by vibration cast , pumpcasting, self-leveling, or shotcreting methods.
Low Cement Castable

EZ Cubed 3000Arrow icon

EZ CUBED® 3000 is a Low Cement, 55% Alumina castable that can be installed by vibration cast, self-flowing, pumping or shotcreting methods.
PDS SDS
EZ CUBED® 3000 is a Low Cement, 55% Alumina castable that can be installed by vibration cast, self-flowing, pumping or shotcreting methods.
Low Cement Castable

EZ Cubed 3200 FineArrow icon

A low cement, 75% alumina castable with a maximum service temperature of 3200°F. This castable can be used in a wide variety of refractory applications. The product can be installed by vibration casting, pumping, and shotcreting methods.
PDS SDS
A low cement, 75% alumina castable with a maximum service temperature of 3200°F. This castable can be used in a wide variety of refractory applications. The product can be installed by vibration casting, pumping, and shotcreting methods.
Low Cement Castable

EZ Cubed 60 LQYArrow icon

An alkali-resistant 60% alumina castable that can be installed using vibration casting, pumping, or wet shotcreting methods. This product has been formulated to be resistant to alkali attack.
PDS SDS
An alkali-resistant 60% alumina castable that can be installed using vibration casting, pumping, or wet shotcreting methods. This product has been formulated to be resistant to alkali attack.
Low Cement Castable

EZ Cubed 60MArrow icon

Mullite-based/ self flow/pumpable/shotcrete/low cement castable
PDS SDS
Mullite-based/ self flow/pumpable/shotcrete/low cement castable
Low Cement Castable

EZ Cubed 60M XTArrow icon

Mullite-based/ self flow/pumpable/shotcrete/low cement castable
PDS SDS
Mullite-based/ self flow/pumpable/shotcrete/low cement castable
Low Cement Castable

EZ Cubed 70PCArrow icon

EZ CUBED® 70PC is a Low Cement, 70% Alumina castable that can be installed by vibration cast, pumping or shotcreting methods.
PDS SDS
EZ CUBED® 70PC is a Low Cement, 70% Alumina castable that can be installed by vibration cast, pumping or shotcreting methods.
Chemically Bonded Castables

EZ EST 10CRArrow icon

EZ EST 10CR is a cement-free, alumina-chrome castable with 10% chromic oxide, that can be installed by casting, pumping, or shotcreting methods. This product requires an additional liquid binder, called EZ ADD binder, for mixing and installation.
PDS SDS
EZ EST 10CR is a cement-free, alumina-chrome castable with 10% chromic oxide, that can be installed by casting, pumping, or shotcreting methods. This product requires an additional liquid binder, called EZ ADD binder, for mixing and installation.
Chemically Bonded Castables

EZ EST 20CRArrow icon

EZ EST 20CR is a cement-free, alumina-chrome castable with 20% chromic oxide, that can be installed by casting, pumping, or shotcreting methods. This product requires an additional liquid binder, called EZ ADD binder, for mixing and installation.
PDS SDS
EZ EST 20CR is a cement-free, alumina-chrome castable with 20% chromic oxide, that can be installed by casting, pumping, or shotcreting methods. This product requires an additional liquid binder, called EZ ADD binder, for mixing and installation.
Chemically Bonded Castables

EZ EST 32-70 PCArrow icon

EZ EST 32-70 PC is a colloidal-silica bonded, pumpable castable. This product is engineered for short turnaround after placement. The colloidal silica binder must be added as a separate component.
PDS SDS
EZ EST 32-70 PC is a colloidal-silica bonded, pumpable castable. This product is engineered for short turnaround after placement. The colloidal silica binder must be added as a separate component.
Chemically Bonded Castables

EZ EST 60PCArrow icon

EZ EST 60PC is a cement-free, 60% alumina castable that can be installed by casting, pumping, or shotcreting methods. This product requires an additional liquid binder, called EZ ADD binder, for mixing and installation
PDS SDS
EZ EST 60PC is a cement-free, 60% alumina castable that can be installed by casting, pumping, or shotcreting methods. This product requires an additional liquid binder, called EZ ADD binder, for mixing and installation
Chemically Bonded Castables

EZ EST 60Z PCArrow icon

EZ EST 60Z PC is a colloidal silica-bonded, 60% alumina castable containing zircon that can be vibration cast, pumped, or shotcreted. This castable requires an additional liquid binder (EZ ADD binder) for mixing and installation. Water is NOT added for installation.
PDS SDS
EZ EST 60Z PC is a colloidal silica-bonded, 60% alumina castable containing zircon that can be vibration cast, pumped, or shotcreted. This castable requires an additional liquid binder (EZ ADD binder) for mixing and installation. Water is NOT added for installation.
Chemically Bonded Castables

EZ EST 95PCArrow icon

Colloiodal Silca-bonded, Tabular Alumina Castable
PDS SDS
Colloiodal Silca-bonded, Tabular Alumina Castable
Low Cement Castable

Kricon 28Arrow icon

KRICON® 28 is a good general purpose, low iron, low cement castable for service temperatures up to 2800°F.
PDS SDS
KRICON® 28 is a good general purpose, low iron, low cement castable for service temperatures up to 2800°F.
Low Cement Castable

Kricon 30Arrow icon

KRICON® 30 is a low iron castable with good slag resistance up to 3000°F
PDS SDS
KRICON® 30 is a low iron castable with good slag resistance up to 3000°F
Low Cement Castable

Kricon 32Arrow icon

KRICON® 32 is designed for service temperatures up to 3200°F. It is a high alumina, low iron castable with excellent hot modulus of rupture strengths.
PDS SDS
KRICON® 32 is designed for service temperatures up to 3200°F. It is a high alumina, low iron castable with excellent hot modulus of rupture strengths.
Insulating Firebrick

LW 20Arrow icon

2000ºF insulating fire brick
PDS SDS
2000ºF insulating fire brick
Insulating Firebrick

LW-20 LIArrow icon

2000ºF insulating fire brick
SDS
2000ºF insulating fire brick
Insulating Firebrick

LW-23Arrow icon

2300ºF insulating fire brick
PDS SDS
2300ºF insulating fire brick
Insulating Firebrick

LW-23 LIArrow icon

2300ºF insulating fire brick
PDS SDS
2300ºF insulating fire brick
Insulating Firebrick

LW-25Arrow icon

2500ºF insulating fire brick
PDS SDS
2500ºF insulating fire brick
Insulating Firebrick

LW-26Arrow icon

2600ºF insulating fire brick
PDS SDS
2600ºF insulating fire brick
Insulating Firebrick

LW-28Arrow icon

2800ºF insulating fire brick
PDS SDS
2800ºF insulating fire brick
Insulating Firebrick

LW-30Arrow icon

3000ºF insulating fire brick
PDS SDS
3000ºF insulating fire brick
Insulating Firebrick

LW-32Arrow icon

3200ºF insulating fire brick
PDS SDS
3200ºF insulating fire brick
Conventional Castable

Pacocast 28LIArrow icon

PACOCAST 28LI castable combines the qualities of a pyrophyllite/andalusite mineral based composition. It's low iron content makes it ideal for higher temperatures and reducing atmospheres. PACOCAST 28LI should be installed using vibration casting, It is not recommended for gunning use; for gunning see HM-28 LI.
PDS SDS
PACOCAST 28LI castable combines the qualities of a pyrophyllite/andalusite mineral based composition. It's low iron content makes it ideal for higher temperatures and reducing atmospheres. PACOCAST 28LI should be installed using vibration casting, It is not recommended for gunning use; for gunning see HM-28 LI.
Conventional Castable

Pacocast 28LI CoarseArrow icon

PACOCAST 28LI COARSE GRAIN offers the qualities of a Pyrophyllite/Andalusite mineral based composition in a coarse grained package. Maximum aggregate size in this product is 1/2 to 3/4 of an inch. Pacocast 28LI Coarse Grain is designed for use in applications where mechanical abuse and impacts are common.
PDS SDS
PACOCAST 28LI COARSE GRAIN offers the qualities of a Pyrophyllite/Andalusite mineral based composition in a coarse grained package. Maximum aggregate size in this product is 1/2 to 3/4 of an inch. Pacocast 28LI Coarse Grain is designed for use in applications where mechanical abuse and impacts are common.
Alumina Brick

PatriotArrow icon

Burned fire clay brick
PDS SDS
Burned fire clay brick
Alumina Brick

Patriot HFArrow icon

High fired, super duty, carbon monoxide resistant brick
PDS SDS
High fired, super duty, carbon monoxide resistant brick
Chemically Bonded Castables

Rescobond 3000Arrow icon

RESCOBOND 3000 is a chemically-bonded, air-setting, single component refractory castable. This product bonds to existing refractory and can be used in a variety of different applications including patching. To use, mix RESCOBOND 3000 with water and cast. It develops a quick set and can be heated shortly after installation.
PDS SDS
RESCOBOND 3000 is a chemically-bonded, air-setting, single component refractory castable. This product bonds to existing refractory and can be used in a variety of different applications including patching. To use, mix RESCOBOND 3000 with water and cast. It develops a quick set and can be heated shortly after installation.
Chemically Bonded Castables

Rescobond 3000 (UK)Arrow icon

RESCOBOND 3000 is a chemically-bonded, air-setting, single component refractory castable. This product bonds to existing refractory and can be used in a variety of different applications including patching. To use, mix RESCOBOND 3000 with water and cast. It develops a quick set and can be heated shortly after installation.
PDS SDS
RESCOBOND 3000 is a chemically-bonded, air-setting, single component refractory castable. This product bonds to existing refractory and can be used in a variety of different applications including patching. To use, mix RESCOBOND 3000 with water and cast. It develops a quick set and can be heated shortly after installation.
Chemically Bonded Castables

Rescobond 3000GArrow icon

RESCOBOND 3000G is a chemically-bonded, air-setting, single component gunning mix. This product can be installed by conventional gunning and handpacking methods and bonds to existing refractory. When gunning, predampening is NOT suggested for this gun mix. This product develops a quick set and can be heated shortly after installation. RESCOBOND 3000G should NOT be installed by vibration casting methods.
PDS SDS
RESCOBOND 3000G is a chemically-bonded, air-setting, single component gunning mix. This product can be installed by conventional gunning and handpacking methods and bonds to existing refractory. When gunning, predampening is NOT suggested for this gun mix. This product develops a quick set and can be heated shortly after installation. RESCOBOND 3000G should NOT be installed by vibration casting methods.
Chemically Bonded Castables

Rescobond 3000G (UK)Arrow icon

RESCOBOND 3000G is a chemically-bonded, air-setting, single component gunning mix. This product can be installed by conventional gunning and handpacking methods and bonds to existing refractory. When gunning, predampening is NOT suggested for this gun mix. This product develops a quick set and can be heated shortly after installation. RESCOBOND 3000G should NOT be installed by vibration casting methods.
PDS SDS
RESCOBOND 3000G is a chemically-bonded, air-setting, single component gunning mix. This product can be installed by conventional gunning and handpacking methods and bonds to existing refractory. When gunning, predampening is NOT suggested for this gun mix. This product develops a quick set and can be heated shortly after installation. RESCOBOND 3000G should NOT be installed by vibration casting methods.
Insulating Castable

Rescocast 3Arrow icon

RESCOCAST 3 is a high performance insulating castable designed for a variety of applications. Its density is approximately 60 lb/ft3 and offers superior strength characteristics, as well as a high strength-to-insulation ratio. This material can be used as an original lining material or as a replacement for refractory ceramic fiber. RESCOCAST 3 can be installed by either gunning or casting methods. For pumpcasting or shotcreting applications, RESCOCAST 3 PC is recommended.
PDS SDS
RESCOCAST 3 is a high performance insulating castable designed for a variety of applications. Its density is approximately 60 lb/ft3 and offers superior strength characteristics, as well as a high strength-to-insulation ratio. This material can be used as an original lining material or as a replacement for refractory ceramic fiber. RESCOCAST 3 can be installed by either gunning or casting methods. For pumpcasting or shotcreting applications, RESCOCAST 3 PC is recommended.
Insulating Castable

Rescocast 3 (UK)Arrow icon

RESCOCAST 3 is a high performance insulating castable designed for a variety of applications. Its density is approximately 60 lb/ft3 and offers superior strength characteristics, as well as a high strength-to-insulation ratio. This material can be used as an original lining material or as a replacement for refractory ceramic fiber. RESCOCAST 3 can be installed by either gunning or casting methods. For pumpcasting or shotcreting applications, RESCOCAST 3 PC is recommended.
PDS SDS
RESCOCAST 3 is a high performance insulating castable designed for a variety of applications. Its density is approximately 60 lb/ft3 and offers superior strength characteristics, as well as a high strength-to-insulation ratio. This material can be used as an original lining material or as a replacement for refractory ceramic fiber. RESCOCAST 3 can be installed by either gunning or casting methods. For pumpcasting or shotcreting applications, RESCOCAST 3 PC is recommended.
Insulating Castable

Rescocast 3-35Arrow icon

RESCOCAST 3-35 is an insulating castable with an operating temperature up to 2000°F, with a good strength to density ratio. It has been used as an insulating material in bi-wall linings and also as a single component lining where erosive conditions are not too severe. Unlike loose fill or insulating block, RESCOCAST 3-35 will not settle or disintegrate under adverse conditions.
PDS SDS
RESCOCAST 3-35 is an insulating castable with an operating temperature up to 2000°F, with a good strength to density ratio. It has been used as an insulating material in bi-wall linings and also as a single component lining where erosive conditions are not too severe. Unlike loose fill or insulating block, RESCOCAST 3-35 will not settle or disintegrate under adverse conditions.
Insulating Castable

Rescocast 3AArrow icon

RESCOCAST 3A is a lightweight, low iron, insulating castable which has a service limit temperature of 2500°F. It is used primarily where reducing atmospheres may be present. RESCOCAST 3A can be installed by either gunning or casting methods.
PDS SDS
RESCOCAST 3A is a lightweight, low iron, insulating castable which has a service limit temperature of 2500°F. It is used primarily where reducing atmospheres may be present. RESCOCAST 3A can be installed by either gunning or casting methods.
Insulating Castable

Rescocast 3A (UK)Arrow icon

RESCOCAST 3A is a lightweight, low iron, insulating castable which has a service limit temperature of 2500°F. It is used primarily where reducing atmospheres may be present. RESCOCAST 3A can be installed by either gunning or casting methods.
PDS SDS
RESCOCAST 3A is a lightweight, low iron, insulating castable which has a service limit temperature of 2500°F. It is used primarily where reducing atmospheres may be present. RESCOCAST 3A can be installed by either gunning or casting methods.
Plastic

Rescoram 10CRArrow icon

RESCORAM 10 CR is a high alumina, phosphate-bonded plastic with 10% chromic oxide that is used throughout the metals producing industries. Its chemical bond develops high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics.
PDS SDS
RESCORAM 10 CR is a high alumina, phosphate-bonded plastic with 10% chromic oxide that is used throughout the metals producing industries. Its chemical bond develops high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics.
Plastic

Rescoram 20CRArrow icon

RESCORAM 20CR is a Phosphate-Bonded Alumina-Chrome Plastic that contains 20% chromic oxide, for increased slag and corrosion resistance.
PDS SDS
RESCORAM 20CR is a Phosphate-Bonded Alumina-Chrome Plastic that contains 20% chromic oxide, for increased slag and corrosion resistance.
Plastic

Rescoram 60Arrow icon

RESCORAM 60 is a high alumina, phosphate-bonded plastic that offers excellent resistance to alkali attack. Phosphate bonding allows RESCORAM 60 to develop high strength at lower temperatures.
PDS SDS
RESCORAM 60 is a high alumina, phosphate-bonded plastic that offers excellent resistance to alkali attack. Phosphate bonding allows RESCORAM 60 to develop high strength at lower temperatures.
Plastic

Rescoram 70 BlueArrow icon

RESCORAM 70 BLUE is a mullite, phosphate-bonded plastic material that is used throughout the metals, power, cement, and lime producing industries. Its chemical bond develops high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics. This product is designed to resist alkali attack.
PDS SDS
RESCORAM 70 BLUE is a mullite, phosphate-bonded plastic material that is used throughout the metals, power, cement, and lime producing industries. Its chemical bond develops high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics. This product is designed to resist alkali attack.
Plastic

Rescoram 70SCArrow icon

RESCORAM 70 SC is a 70% silicon carbide, phosphate-bonded plastic material that is used throughout the metals, power, cement, and lime producing industries. Its chemical bond develops high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics.
PDS SDS
RESCORAM 70 SC is a 70% silicon carbide, phosphate-bonded plastic material that is used throughout the metals, power, cement, and lime producing industries. Its chemical bond develops high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics.
Plastic

Rescoram 7CRArrow icon

RESCORAM 7 CR is a high alumina, phosphate-bonded plastic with 7% chromic oxide that is used throughout the metals producing industries. RESCORAM 7 CR has a chemical bond that develops a high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics.
PDS SDS
RESCORAM 7 CR is a high alumina, phosphate-bonded plastic with 7% chromic oxide that is used throughout the metals producing industries. RESCORAM 7 CR has a chemical bond that develops a high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics.
Plastic

Rescoram 85Arrow icon

RESCORAM 85 is a high alumina, phosphate-bonded plastic material that is used throughout the metals, power, cement, and lime producing industries. Its chemical bond develops high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics.
PDS SDS
RESCORAM 85 is a high alumina, phosphate-bonded plastic material that is used throughout the metals, power, cement, and lime producing industries. Its chemical bond develops high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics.
Plastic

Rescoram 85SArrow icon

Phosphate bonded alumina plastic
PDS SDS
Phosphate bonded alumina plastic
Plastic

Rescoram 90Arrow icon

RESCORAM 90 is a high alumina, phosphate-bonded plastic material that is used throughout the metals, power, cement, and lime producing industries. Its chemical bond develops high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics.
PDS SDS
RESCORAM 90 is a high alumina, phosphate-bonded plastic material that is used throughout the metals, power, cement, and lime producing industries. Its chemical bond develops high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics.
Plastic

Rescoram A-45HCArrow icon

Rescoram A-45HC is a super duty, air-setting, plastic refractory that is designed primarily for high temperature boiler service. This product exceeds ASTM standard for PCE 32-1/2.
PDS SDS
Rescoram A-45HC is a super duty, air-setting, plastic refractory that is designed primarily for high temperature boiler service. This product exceeds ASTM standard for PCE 32-1/2.
Plastic

Rescoram A-60Arrow icon

RESCORAM A-60 is a high alumina, air-setting, 3100°F service temperature plastic refractory that is used throughout the metals, power, cement, and lime producing industries where higher temperature requirements demand a more refractory material. It is manufactured using Pyrophyllite-Andalusite-Alumina materials which give the product unique long term hot load resistance.
PDS SDS
RESCORAM A-60 is a high alumina, air-setting, 3100°F service temperature plastic refractory that is used throughout the metals, power, cement, and lime producing industries where higher temperature requirements demand a more refractory material. It is manufactured using Pyrophyllite-Andalusite-Alumina materials which give the product unique long term hot load resistance.
Plastic

Rescoram A-80Arrow icon

RESCORAM A-80 is a high alumina, air-setting, 3300°F service temperature plastic refractory that is used throughout the metals, power, cement and lime producing industries where higher temperature requirements demand a higher PCE or more refractory material.
PDS SDS
RESCORAM A-80 is a high alumina, air-setting, 3300°F service temperature plastic refractory that is used throughout the metals, power, cement and lime producing industries where higher temperature requirements demand a higher PCE or more refractory material.
Plastic

Rescoram A-90Arrow icon

An air setting 90% alumina plastic. This product should be installed by pneumatic ramming.
PDS SDS
An air setting 90% alumina plastic. This product should be installed by pneumatic ramming.
Low Cement Castable

Vibrocast 2800Arrow icon

VIBROCAST 2800 is an economical 2800°F low cement castable designed to yield high fired strengths at maximum density. This product should be installed by vibration casting methods only.
PDS SDS
VIBROCAST 2800 is an economical 2800°F low cement castable designed to yield high fired strengths at maximum density. This product should be installed by vibration casting methods only.
Low Cement Castable

Vibrocast 3000Arrow icon

VIBROCAST 3000 is an economical, Low Cement, 45% Alumina castable that can be installed by vibration cast methods only.
PDS SDS
VIBROCAST 3000 is an economical, Low Cement, 45% Alumina castable that can be installed by vibration cast methods only.
Low Cement Castable

Vibrocast 50Arrow icon

VIBROCAST 50 is a Low Cement, 45% Alumina castable that can be installed by vibration cast methods only.
PDS SDS
VIBROCAST 50 is a Low Cement, 45% Alumina castable that can be installed by vibration cast methods only.
Low Cement Castable

Vibrocast 50 (UK)Arrow icon

VIBROCAST 50 is a Low Cement, 45% Alumina castable that can be installed by vibration cast methods only.
PDS SDS
VIBROCAST 50 is a Low Cement, 45% Alumina castable that can be installed by vibration cast methods only.
Low Cement Castable

Vibrocast 50PCArrow icon

VIBROCAST 50PC is a Pumpable, Low Cement, 45% Alumina castable that can be installed by vibration casting, pumping, and shotcreting methods. It offers excellent resistance to alkalis and requires substantially less vibration than standard low cement castables.
PDS SDS
VIBROCAST 50PC is a Pumpable, Low Cement, 45% Alumina castable that can be installed by vibration casting, pumping, and shotcreting methods. It offers excellent resistance to alkalis and requires substantially less vibration than standard low cement castables.
Low Cement Castable

Vibrocast 60Arrow icon

VIBROCAST 60 is a Mullite-Based, Low Cement, 60% Alumina castable that can be installed by vibration cast methods only.
PDS SDS
VIBROCAST 60 is a Mullite-Based, Low Cement, 60% Alumina castable that can be installed by vibration cast methods only.
Low Cement Castable

Vibrocast 60PCArrow icon

VIBROCAST 60PC is a Pumpable, Low Cement, 60% Alumina castable based on a mullite aggregate, that can be installed by vibration cast, pumping, and shotcreting methods.
PDS SDS
VIBROCAST 60PC is a Pumpable, Low Cement, 60% Alumina castable based on a mullite aggregate, that can be installed by vibration cast, pumping, and shotcreting methods.