Incineration
At Resco Products, we know incineration — and we have over 30 years of experience in the refractory industry to prove it. Whether you're looking for crematorium or waste incineration solutions, we'll come up with a custom plan to suit your application. Whether your incineration facility is designed for hazardous waste, recycling or composting, or waste to energy facility we have your solution. Our designers can use top industry tools, such as 3D modeling, to map out your project and calculate costs.
Incineration Refractory Solutions
Resco's relationships with installation companies across the globe allow us to assist with every step of the implementation process. At the end of a product's life cycle, we'll run a post-mortem report as well. View our refractory solutions for crematoriums and waste incineration. Feel free to contact Resco Products if you have any questions.
RELATED PRODUCTS
Caulk
22 Caulk
22 Caulk
22 CAULK is ideal for filling joints and cracks in refractory linings. Job site mixing is not needed. Just snip-off the tip of the ready-to-use caulking tube and apply the moist material using a hand or air powered caulking gun. Heat loss through joints and cracks will be reduced. Fine particles will not accumulate in those openings, preventing further damage to the lining. The surface of 22 CAULK will harden when exposed to air.
22 CAULK is ideal for filling joints and cracks in refractory linings. Job site mixing is not needed. Just snip-off the tip of the ready-to-use caulking tube and apply the moist material using a hand or air powered caulking gun. Heat loss through joints and cracks will be reduced. Fine particles will not accumulate in those openings, preventing further damage to the lining. The surface of 22 CAULK will harden when exposed to air.
Wet Mortar
Adacor 70 Dip
Adacor 70 Dip
ADACOR 70 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 70 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
ADACOR 70 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 70 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
Wet Mortar
Adacor 70 TR-D3.5
Adacor 70 TR-D3.5
ADACOR 70 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 70 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
ADACOR 70 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 70 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
Wet Mortar
Adacor 80 Dip
Adacor 80 Dip
ADACOR 80 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 80 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
ADACOR 80 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 80 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
Wet Mortar
Adacor 80 TR-D3.5
Adacor 80 TR-D3.5
ADACOR 80 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 80 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
ADACOR 80 is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. ADACOR 80 is recommended for laying up super duty, high alumina, and mullite brick. It has a high alumina content which gives the product resistance to erosion and also a high bonding strength at temperatures up to 3200°F.
Dry Mortar
Adamant Air Set-Dry
Adamant Air Set-Dry
A dry, air-setting fireclay - silica based mortar, with a maximum service temperature of 3000°F, used for bonding super duty brick. Just add water to obtain the desired trowel or dipping consistency. This product will take an air set, but does not develop its full joint strength until after heating to 220°F (105°C)
A dry, air-setting fireclay - silica based mortar, with a maximum service temperature of 3000°F, used for bonding super duty brick. Just add water to obtain the desired trowel or dipping consistency. This product will take an air set, but does not develop its full joint strength until after heating to 220°F (105°C)
Wet Mortar
Adamant X Green
Adamant X Green
ADAMANT X is a fireclay-silica based material with a maximum recommended service temperature of 2800°F. It is shipped as a wet, ready to use mortar and will stay in suspension over long periods of time. ADAMANT X is the original wet air setting cement for bonding intermediate, high heat and super duty fireclay brick. Produced since 1907, ADAMANT X was one of the first bonding mortars introduced to industry that truly bonded brick together. Through the years, the ADAMANT X trademark has stood for quality and has been widely accepted by refractory consumers.
ADAMANT X is a fireclay-silica based material with a maximum recommended service temperature of 2800°F. It is shipped as a wet, ready to use mortar and will stay in suspension over long periods of time. ADAMANT X is the original wet air setting cement for bonding intermediate, high heat and super duty fireclay brick. Produced since 1907, ADAMANT X was one of the first bonding mortars introduced to industry that truly bonded brick together. Through the years, the ADAMANT X trademark has stood for quality and has been widely accepted by refractory consumers.
Wet Mortar
Adaphos 85 Dip
Adaphos 85 Dip
ADAPHOS 85 is a wet ready-mixed high alumina bonding mortar with a chemical bonding system. With the unique bonding system, a high bonding strength is developed at lower temperatures (300-600°F) and the high bonding strength continues until a ceramic bonding occurs. ADAPHOS 85 is primarily used to lay up high alumina brick in ladles and is available in both trowelling and dipping consistencies. It is used in areas where severe service conditions require increased refractoriness to corrosion/erosion from slags.
ADAPHOS 85 is a wet ready-mixed high alumina bonding mortar with a chemical bonding system. With the unique bonding system, a high bonding strength is developed at lower temperatures (300-600°F) and the high bonding strength continues until a ceramic bonding occurs. ADAPHOS 85 is primarily used to lay up high alumina brick in ladles and is available in both trowelling and dipping consistencies. It is used in areas where severe service conditions require increased refractoriness to corrosion/erosion from slags.
Wet Mortar
Adaphos 85 TR-D3
Adaphos 85 TR-D3
ADAPHOS 85 is a wet ready-mixed high alumina bonding mortar with a chemical bonding system. With the unique bonding system, a high bonding strength is developed at lower temperatures (300-600°F) and the high bonding strength continues until a ceramic bonding occurs. ADAPHOS 85 is primarily used to lay up high alumina brick in ladles and is available in both trowelling and dipping consistencies. It is used in areas where severe service conditions require increased refractoriness to corrosion/erosion from slags.
ADAPHOS 85 is a wet ready-mixed high alumina bonding mortar with a chemical bonding system. With the unique bonding system, a high bonding strength is developed at lower temperatures (300-600°F) and the high bonding strength continues until a ceramic bonding occurs. ADAPHOS 85 is primarily used to lay up high alumina brick in ladles and is available in both trowelling and dipping consistencies. It is used in areas where severe service conditions require increased refractoriness to corrosion/erosion from slags.
Alumina Brick
Alumex P-7
Alumex P-7
ALUMEX® P-7 is phosphate-bonded with high strength and load-bearing ability, low porosity and modulus of elasticity, and excellent resistance to abrasion, erosion and mechanical abuse. Its physical characteristics are considered second to none in the realm of “70%-alumina” brick.
Alumina Brick
Alumex P-8
Alumex P-8
ALUMEX® P-8 is more refractory than the ALUMEX® P-7 quality, and possesses exceptional strength. It has excellent resistance to thermal spalling and is recommended for applications where very dense brick with low porosity are required and where operating temperatures are more severe.
Alumina Brick
Alumex P-85-HS
Alumex P-85-HS
ALUMEX® P-85 HS exhibits a combination of very high strengths, high abrasion resistance, and excellent thermal shock resistance. Its high purity composition yields a refractory product that can withstand severe alkali attack.
Plastic
Corline
Corline
CORLINE® was designed for linings exposed to extreme erosion environments in heat enclosures of the oil refining, petrochemical, gas processing and solid fuels processing industries. CORLINE® is a High Alumina, Chemically Bonded, Erosion Resistant Refractory.
RAM
Corpatch 50 MS
Corpatch 50 MS
CORPATCH® 50-MS is an 50% alumina patching mix. It is an all purpose patching mix that is tough enough to be one of the best erosion or abrasion resistant refractory lining materials available today, yet it is pliable enough to be installed and shaped by hand or mallet.
RAM
Corpatch 80
Corpatch 80
CORPATCH® 80 is an 80% alumina patching mix. It is an all purpose patching mix that is tough enough to be one of the best erosion or abrasion resistant refractory lining materials available today, yet it is pliable enough to be installed and shaped by hand or mallet.
RAM
Corpatch 80 MS
Corpatch 80 MS
CORPATCH® 80-MS is an 80% alumina patching mix. It is an all purpose patching mix that is tough enough to be one of the best erosion or abrasion resistant refractory lining materials available today, yet it is pliable enough to be installed and shaped by hand or mallet.
Low Cement Castable
EZ Cubed 56SCPC
EZ Cubed 56SCPC
EZ CUBED® 56SCPC is a Low Cement, Silicon Carbide-based castable. This product can be installed by vibration cast, pumping or shotcreting methods.
Low Cement Castable
EZ Cubed 60 LQY
EZ Cubed 60 LQY
An alkali-resistant 60% alumina castable that can be installed using vibration casting, pumping, or wet shotcreting methods. This product has been formulated to be resistant to alkali attack.
Low Cement Castable
EZ Cubed 60M
EZ Cubed 60M
Mullite-based/ self flow/pumpable/shotcrete/low cement castable
Low Cement Castable
EZ Cubed 60M XT
EZ Cubed 60M XT
Mullite-based/ self flow/pumpable/shotcrete/low cement castable
Low Cement Castable
EZ Cubed 80-15
EZ Cubed 80-15
EZ CUBED® 80-15 is a Low Cement, 80% Alumina castable containing a silicon carbide addition that can be installed by vibration cast, self-flowing, pumping or shotcreting methods.
Low Cement Castable
EZ Cubed 93LC
EZ Cubed 93LC
EZ CUBED® 93LC is a Low Cement, 93% Alumina castable with High Abrasion Resistance. This product can be installed by vibration cast, self-flowing, pumping or shotcreting methods.
Chemically Bonded Castables
EZ EST 10CR
EZ EST 10CR
EZ EST 10CR is a cement-free, alumina-chrome castable with 10% chromic oxide, that can be installed by casting, pumping, or shotcreting methods. This product requires an additional liquid binder, called EZ ADD binder, for mixing and installation.
Chemically Bonded Castables
EZ EST 20CR
EZ EST 20CR
EZ EST 20CR is a cement-free, alumina-chrome castable with 20% chromic oxide, that can be installed by casting, pumping, or shotcreting methods. This product requires an additional liquid binder, called EZ ADD binder, for mixing and installation.
Chemically Bonded Castables
EZ EST 60G
EZ EST 60G
EZ EST 60G is a cement-free, 60% alumina gun mix that can be installed by conventional gunning methods. This product requires an additional liquid binder, called EZ ADD binder, for installation. EZ ADD binder is added at the gunning nozzle during installation
Chemically Bonded Castables
EZ EST 60PC
EZ EST 60PC
EZ EST 60PC is a cement-free, 60% alumina castable that can be installed by casting, pumping, or shotcreting methods. This product requires an additional liquid binder, called EZ ADD binder, for mixing and installation
Conventional Castable
Hi Strength 25
Hi Strength 25
HI-STRENGTH™ 25 is a very cost-effective, high duty refractory castable designed to resist abrasion and erosion at moderate temperatures. It has excellent thermal shock resistance and is widely used as a refractory lining and maintenance material for many different applications.
Conventional Castable
Hi Strength 26LI
Hi Strength 26LI
HI-STRENGTH™ 26-LI was developed to meet the demands for a low iron castable in the 125 Ibs/ft3 range. The lower iron content results in better resistance to reducing atmospheres. It has excellent strength throughout its temperature range and very good abrasion and erosion resistance.
Conventional Castable
Hi Strength 28LI
Hi Strength 28LI
HI-STRENGTH™ 28-LI produces a tough, monolithic structure with negligible shrinkage. It has good refractoriness with a 2800°F use limit. A casting or ramming consistency may be obtained by control of water during mixing.
Conventional Castable
HM 26 LIF
HM 26 LIF
HM 26 LIF is a Fine Grain, General Purpose Gunning Mix bonded with Low Iron Cement. HM 26 LIF can be used to repair and maintain Coke Oven Walls.
Conventional Castable
HM 28 LI
HM 28 LI
HM 28 LI is a low iron refractory gunning mix based on hard fired alumina/silica aggregate of approximately 60 % mullite content and a low iron calcium aluminate binder.
Conventional Castable
HM 28 LI CO
HM 28 LI CO
HM 28LI CO is a low iron refractory gunning mix based on hard fired alumina/silica aggregate of approximately 60% mullite content and a low iron calcium aluminate binder, designed for Coke Oven gunning
Conventional Castable
HM 28 LIF CO
HM 28 LIF CO
HM 28LIF CO is a low iron refractory gunning mix based on hard fired alumina/silica aggregate of approximately 60% mullite content and a low iron calcium aluminate binder, designed for Coke Oven gunning
Conventional Castable
HM 70
HM 70
HM 70 is a High Alumina refractory composition bonded with Low Iron Cement. HM 70 is designed for general purpose repairs where there is a need for resistance to high temperatures and erosion.
Low Cement Castable
Kricon 28
Kricon 28
KRICON® 28 is a good general purpose, low iron, low cement castable for service temperatures up to 2800°F.
Low Cement Castable
Kricon 30
Kricon 30
KRICON® 30 is a low iron castable with good slag resistance up to 3000°F
Low Cement Castable
Kricon 32
Kricon 32
KRICON® 32 is designed for service temperatures up to 3200°F. It is a high alumina, low iron castable with excellent hot modulus of rupture strengths.
Low Cement Castable
Kricon 32-70
Kricon 32-70
KRICON® 32-70 is a 77% alumina, low iron castable with a 3200°F temperature limit. It offers improved slag resistance and positive reheat expansion at steel making temperatures to insure tight, crack-free linings in cast ladles and tundishes.
Low Cement Castable
Kricon 34
Kricon 34
KRICON® 34 is designed for service temperatures up to 3400°F. It is an extra high alumina castable featuring low porosity and low permeability while maintaining good thermal shock resistance. This mix is very pure at 99% alumina with a very low content of total impurities.
Low Cement Castable
Kricon 34-10
Kricon 34-10
KRICON® 34-10 is a chromia-containing, tabular alumina-based castable. The 10% chromia addition makes this low cement product ideal for high wear areas attacked by slags by improving volume stability and reducing the tendency for the formation of shrinkage cracks at very high temperatures. It can be used in steel, copper, and other applications requiring excellent corrosion resistance. This castable should be installed using vibration casting methods.
KRICON® 34-10 is a chromia-containing, tabular alumina-based castable. The 10% chromia addition makes this low cement product ideal for high wear areas attacked by slags by improving volume stability and reducing the tendency for the formation of shrinkage cracks at very high temperatures. It can be used in steel, copper, and other applications requiring excellent corrosion resistance. This castable should be installed using vibration casting methods.
Low Cement Castable
Kricon 34-5
Kricon 34-5
KRICON® 34-5 is a chromia-containing, tabular alumina-based castable. The 5% chromia addition makes this low cement product ideal for high wear areas attacked by slags by improving volume stability and reducing the tendency for the formation of shrinkage cracks at very high temperatures. It can be used in steel, copper, and other applications requiring excellent corrosion resistance.
KRICON® 34-5 is a chromia-containing, tabular alumina-based castable. The 5% chromia addition makes this low cement product ideal for high wear areas attacked by slags by improving volume stability and reducing the tendency for the formation of shrinkage cracks at very high temperatures. It can be used in steel, copper, and other applications requiring excellent corrosion resistance.
Low Cement Castable
Kricon CCM-30
Kricon CCM-30
KRICON® CCM 30 is a high purity chromia-containing, tabular alumina-based castable. The 30% chromia addition makes this low cement product ideal for high wear areas attacked by slags by improving volume stability and reducing the tendency for the formation of shrinkage cracks at very high temperatures. This castable should be installed using vibration casting methods.
KRICON® CCM 30 is a high purity chromia-containing, tabular alumina-based castable. The 30% chromia addition makes this low cement product ideal for high wear areas attacked by slags by improving volume stability and reducing the tendency for the formation of shrinkage cracks at very high temperatures. This castable should be installed using vibration casting methods.
Wet Mortar
Ladlelock 3000 Dip
Ladlelock 3000 Dip
LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
Wet Mortar
Ladlelock 3000 GU-TR-D3.5
Ladlelock 3000 GU-TR-D3.5
LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
Wet Mortar
Ladlelock 3000 GU-TR-W-D3.5
Ladlelock 3000 GU-TR-W-D3.5
LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
Wet Mortar
Ladlelock 3000 NW-TR-D2.5
Ladlelock 3000 NW-TR-D2.5
LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
Wet Mortar
Ladlelock 3000 NW-TR-W-2.5
Ladlelock 3000 NW-TR-W-2.5
LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
Wet Mortar
Ladlelock 3000 TF-TR-D3
Ladlelock 3000 TF-TR-D3
LADLELOCK 3000 TF is an Premium, Air-Setting, Superduty Mortar and is available in a premixed, Troweling consistency.
Wet Mortar
Ladlelock 3000 TR-D2
Ladlelock 3000 TR-D2
LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
Wet Mortar
Ladlelock 3000 TR-D2.5
Ladlelock 3000 TR-D2.5
LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
Wet Mortar
Ladlelock 3000 TR-W-D2.5
Ladlelock 3000 TR-W-D2.5
LADLELOCK 3000 is a Premium, Air-Setting, Superduty Mortar and is available in Premixed, Troweling and Dipping consistencies
Wet Mortar
Ladlelock 50S Dip
Ladlelock 50S Dip
LADLELOCK 50 is a Premium, Air-Setting, High Alumina Mortar and is available in Trowelling and Dipping consistencies.
LADLELOCK 50 is a Premium, Air-Setting, High Alumina Mortar and is available in Trowelling and Dipping consistencies.
Wet Mortar
Ladlelock 50S Dip-W
Ladlelock 50S Dip-W
LADLELOCK 50 is a Premium, Air-Setting, High Alumina Mortar and is available in Trowelling and Dipping consistencies.
LADLELOCK 50 is a Premium, Air-Setting, High Alumina Mortar and is available in Trowelling and Dipping consistencies.
Wet Mortar
Ladlelock 70 JP-TR-D3
Ladlelock 70 JP-TR-D3
LADLELOCK 70 is a Premium, Air-Setting, High Alumina Mortar and is available in Trowelling and Dipping consistencies.
Wet Mortar
Ladlelock 70 JP-TR-W-D3
Ladlelock 70 JP-TR-W-D3
LADLELOCK 70 is a Premium, Air-Setting, High Alumina Mortar and is available in Trowelling and Dipping consistencies.
Wet Mortar
Ladlelock 70 TF-TR-D3
Ladlelock 70 TF-TR-D3
LADLELOCK 70 is a Premium, Air-Setting, High Alumina Mortar and is available in Trowelling and Dipping consistencies.
Wet Mortar
Ladlelock 70 TR-D3.5
Ladlelock 70 TR-D3.5
LADLELOCK 70 is a Premium, Air-Setting, High Alumina Mortar and is available in Trowelling and Dipping consistencies.
Wet Mortar
Ladlelock 80 Dip
Ladlelock 80 Dip
Ladle lock 80 is a high alumina, air setting mortar, premixed. Available consistencies: dipping, trowelling (winterized versions available)
Wet Mortar
Ladlelock 80 Dip-W
Ladlelock 80 Dip-W
Ladle lock 80 is a high alumina, air setting mortar, premixed. Available consistencies: dipping, trowelling (winterized versions available)
Wet Mortar
Ladlelock 80 TR-D2
Ladlelock 80 TR-D2
Ladle lock 80 is a high alumina, air setting mortar, premixed. Available consistencies: dipping, trowelling (winterized versions available)
Wet Mortar
Ladlelock 80 TR-D3
Ladlelock 80 TR-D3
Ladle lock 80 is a high alumina, air setting mortar, premixed. Available consistencies: dipping, trowelling (winterized versions available)
Wet Mortar
Ladlelock 80 TR-W-D3
Ladlelock 80 TR-W-D3
Ladle lock 80 is a high alumina, air setting mortar, premixed. Available consistencies: dipping, trowelling (winterized versions available)
Wet Mortar
Ladlelock 85 Dip
Ladlelock 85 Dip
LADLELOCK 85 is a high alumina, premixed, air setting mortar. LADLELOCK 85 is available in standard and Winterized versions, and dipping or trowelling consistencies.
Wet Mortar
Ladlelock 85 Dip-W
Ladlelock 85 Dip-W
LADLELOCK 85 is a high alumina, premixed, air setting mortar. LADLELOCK 85 is available in standard and Winterized versions, and dipping or trowelling consistencies.
Wet Mortar
Ladlelock 85 PB-TR-D3
Ladlelock 85 PB-TR-D3
LADLELOCK 85 PB is a Premium, Phosphate-Bonded, 85% Alumina Mortar. This mortar is available in a premixed, trowelling consistency and can be used in a wide variety of mortar applications.
Wet Mortar
Ladlelock 85 PR-TR-D4
Ladlelock 85 PR-TR-D4
LADLELOCK 85 PB is a Premium, Phosphate-Bonded, 85% Alumina Mortar. This mortar is available in a premixed, trowelling consistency and can be used in a wide variety of mortar applications.
Wet Mortar
Ladlelock 85 TR-D3
Ladlelock 85 TR-D3
LADLELOCK 85 is a high alumina, premixed, air setting mortar. LADLELOCK 85 is available in standard and Winterized versions, and dipping or trowelling consistencies.
Wet Mortar
Ladlelock 85 TR-W-D3
Ladlelock 85 TR-W-D3
LADLELOCK 85 is a high alumina, premixed, air setting mortar. LADLELOCK 85 is available in standard and Winterized versions, and dipping or trowelling consistencies.
Wet Mortar
Ladlelock 90 PBP-Dip
Ladlelock 90 PBP-Dip
LADLELOCK 90 PBP is a Premium, Phosphate-Bonded, 90% Alumina Mortar and is available in a premixed, Dipping consistency.
Wet Mortar
Ladlelock 90 PB-TR-D2
Ladlelock 90 PB-TR-D2
LADLELOCK 90 PB is a high quality tabular alumina based, phosphate bonded mortar. LADLELOCK 90 PB is available in standard and Winterized versions.
Wet Mortar
Ladlelock 90 PB-TR-D3
Ladlelock 90 PB-TR-D3
LADLELOCK 90 PB is a high quality tabular alumina based, phosphate bonded mortar. LADLELOCK 90 PB is available in standard and Winterized versions.
Wet Mortar
Ladlelock 90 PB-TR-W-D2
Ladlelock 90 PB-TR-W-D2
LADLELOCK 90 PB is a high quality tabular alumina based, phosphate bonded mortar. LADLELOCK 90 PB is available in standard and Winterized versions.
Wet Mortar
Ladlelock 90 PB-TR-W-D2.5
Ladlelock 90 PB-TR-W-D2.5
LADLELOCK 90 PB is a high quality tabular alumina based, phosphate bonded mortar. LADLELOCK 90 PB is available in standard and Winterized versions.
Wet Mortar
Ladlelock 90PB-TR-D2.5
Ladlelock 90PB-TR-D2.5
LADLELOCK 90 PB is a high quality tabular alumina based, phosphate bonded mortar. LADLELOCK 90 PB is available in standard and Winterized versions.
Wet Mortar
Ladlelock PB CR5-TR-D3.5
Ladlelock PB CR5-TR-D3.5
Wet Mortar
LL 3000 Tubes
LL 3000 Tubes
LADLELOCK 3000 IS A HIGH STRENGTH SUPERDUTY AIR SETTING MORTAR.
Wet Mortar
LL 3000 Tubes Winter
LL 3000 Tubes Winter
LADLELOCK 3000 IS A HIGH STRENGTH SUPERDUTY AIR SETTING MORTAR.
Conventional Castable
Lo-Erode GM
Lo-Erode GM
LO-ERODE® GM is an economical, highly effective, abrasion and erosion resistant low iron gunning mix for service temperatures up to 2400°F. When properly gunned, it produces rugged monolithic linings with good volume stability.
Dry Mortar
Lo-Set
Lo-Set
LO-SET® is a 40% alumina mortar with a 3000ºF service temperature limit. When mixed with water, it produces a smooth, easy flowing mortar with good workability. It is air-setting and develops a strong bond at atmospheric temperatures. This bond strength is increased when fired at higher temperatures. Extra service life may be gained by applying a brush or spray coat of LO-SET® on any firebrick surface. Use with high duty, superduty, 50% alumina, and 60% alumina brick.
LO-SET® is a 40% alumina mortar with a 3000ºF service temperature limit. When mixed with water, it produces a smooth, easy flowing mortar with good workability. It is air-setting and develops a strong bond at atmospheric temperatures. This bond strength is increased when fired at higher temperatures. Extra service life may be gained by applying a brush or spray coat of LO-SET® on any firebrick surface. Use with high duty, superduty, 50% alumina, and 60% alumina brick.
Mineral Refractory
Oceanite
Oceanite
Produced from high MgO magnesite, OCEANITE® is a granular refractory which when evenly spread on marine and stationary boiler floors, readily absorbs slag. When cooled, the slag-laden Oceanite® is easily removed with a rake
Conventional Castable
Pacocast 28LI
Pacocast 28LI
PACOCAST 28LI castable combines the qualities of a pyrophyllite/andalusite mineral based composition. It's low iron content makes it ideal for higher temperatures and reducing atmospheres. PACOCAST 28LI should be installed using vibration casting, It is not recommended for gunning use; for gunning see HM-28 LI.
PACOCAST 28LI castable combines the qualities of a pyrophyllite/andalusite mineral based composition. It's low iron content makes it ideal for higher temperatures and reducing atmospheres. PACOCAST 28LI should be installed using vibration casting, It is not recommended for gunning use; for gunning see HM-28 LI.
Conventional Castable
Pacocast 28LI Coarse
Pacocast 28LI Coarse
PACOCAST 28LI COARSE GRAIN offers the qualities of a Pyrophyllite/Andalusite mineral based composition in a coarse grained package. Maximum aggregate size in this product is 1/2 to 3/4 of an inch. Pacocast 28LI Coarse Grain is designed for use in applications where mechanical abuse and impacts are common.
PACOCAST 28LI COARSE GRAIN offers the qualities of a Pyrophyllite/Andalusite mineral based composition in a coarse grained package. Maximum aggregate size in this product is 1/2 to 3/4 of an inch. Pacocast 28LI Coarse Grain is designed for use in applications where mechanical abuse and impacts are common.
Alumina Brick
Patriot HF
Patriot HF
High fired, super duty, carbon monoxide resistant brick
Conventional Castable
ProGun 26LI
ProGun 26LI
ProGUN® 26-LI is a conventional mix with less than 2% iron offering excellent performance in service temperatures up to 2600°F
Conventional Castable
ProGun 28LI
ProGun 28LI
ProGUN® 28-LI is a conventional mix with less than 1% iron offering excellent performance in service temperatures up to 2800°F
Conventional Castable
ProGun 30
ProGun 30
ProGUN® 30 is a very refractory, reduced cement mix targeted for general service to 3000°F
Low Cement Castable
ProGun LC 50G
ProGun LC 50G
ProGun LC 50G is a 3000oF low-cement gun mix. This product is designed to give excellent gunnability, low porosity, minimum linear change, and high fired strengths.
ProGun LC 50G is a 3000oF low-cement gun mix. This product is designed to give excellent gunnability, low porosity, minimum linear change, and high fired strengths.
Low Cement Castable
ProGun LC 60G
ProGun LC 60G
ProGun LC 60G is a sixty percent alumina, mullite based, 3100oF, low-cement gun mix that offers excellent resistance to alkalies. This product is designed to give excellent gunnability, low porosity, minimum linear change, and high fired strengths. ProGun LC 60G withstands severe high temperature atmosphere reactions, and erosive corrosive environments.
ProGun LC 60G is a sixty percent alumina, mullite based, 3100oF, low-cement gun mix that offers excellent resistance to alkalies. This product is designed to give excellent gunnability, low porosity, minimum linear change, and high fired strengths. ProGun LC 60G withstands severe high temperature atmosphere reactions, and erosive corrosive environments.
Low Cement Castable
ProGun LC 60G (UK)
ProGun LC 60G (UK)
ProGun LC 60G is a sixty percent alumina, mullite based, 3100oF, low-cement gun mix that offers excellent resistance to alkalies. This product is designed to give excellent gunnability, low porosity, minimum linear change, and high fired strengths. ProGun LC 60G withstands severe high temperature atmosphere reactions, and erosive corrosive environments.
ProGun LC 60G is a sixty percent alumina, mullite based, 3100oF, low-cement gun mix that offers excellent resistance to alkalies. This product is designed to give excellent gunnability, low porosity, minimum linear change, and high fired strengths. ProGun LC 60G withstands severe high temperature atmosphere reactions, and erosive corrosive environments.
Low Cement Castable
ProGun LC 70G
ProGun LC 70G
ProGun LC 70G is a 3200oF, low-cement gun mix that offers excellent resistance to alkalies. This product is designed to give minimum porosity and low linear change with maximum density and high fired strengths, and can withstand severe high temperature erosive and corrosive environments.
Low Cement Castable
ProGun LC 80SCG
ProGun LC 80SCG
ProGun LC 80SCG is an 80% SiC castable that uses low cement binder technology with the gunite installation method. Its low porosity, excellent abrasion resistance and high heat transfer value make this product an excellent choice for the tube walls in the combustion zones of power generating units. The high heat transfer characteristic of the SiC reduces surface slagging and alkali build-up, thereby, improving the operating efficiency of your unit.
ProGun LC 80SCG is an 80% SiC castable that uses low cement binder technology with the gunite installation method. Its low porosity, excellent abrasion resistance and high heat transfer value make this product an excellent choice for the tube walls in the combustion zones of power generating units. The high heat transfer characteristic of the SiC reduces surface slagging and alkali build-up, thereby, improving the operating efficiency of your unit.
Low Cement Castable
ProGun LC FS-6
ProGun LC FS-6
ProGun LC FS-6 is a low cement, fused silica gun mix that offers high strength, very good resistance to abrasion, and low reversible thermal expansion.
Conventional Castable
PuroTab
PuroTab
PUROTAB® is a high purity, low iron, high alumina castable designed specifically for use at temperatures up to 3400°F. It is made with tabular alumina aggregate bonded with a high purity calcium aluminate cement. It is highly resistant to reducing atmospheres as well as high sulfur fuels and charge stocks. It has good volume stability with very good resistance to thermal shock
PUROTAB® is a high purity, low iron, high alumina castable designed specifically for use at temperatures up to 3400°F. It is made with tabular alumina aggregate bonded with a high purity calcium aluminate cement. It is highly resistant to reducing atmospheres as well as high sulfur fuels and charge stocks. It has good volume stability with very good resistance to thermal shock
Insulating Castable
QuikLite 3-35P
QuikLite 3-35P
QUIKLITE 3-35P is a very lightweight 2000°F castable This product can be installed by casting or conventional gunning methods. QUIKLITE 3-35P features a low installed density and low thermal conductivity. After the initial set, QUIKLITE 3-35P can be initially heated without using the traditional ramp-and-hold heatup schedule
QUIKLITE 3-35P is a very lightweight 2000°F castable This product can be installed by casting or conventional gunning methods. QUIKLITE 3-35P features a low installed density and low thermal conductivity. After the initial set, QUIKLITE 3-35P can be initially heated without using the traditional ramp-and-hold heatup schedule
Insulating Castable
QuikLite 3-35PC
QuikLite 3-35PC
QUIKLITE 3-35PC is a very lightweight 2000°F castable This product can be installed by casting or conventional gunning methods. QUIKLITE 3-35PC features a low installed density and low thermal conductivity. After the initial set, QUIKLITE 3-35PC can be initially heated without using the traditional ramp-and-hold heatup schedule.
QUIKLITE 3-35PC is a very lightweight 2000°F castable This product can be installed by casting or conventional gunning methods. QUIKLITE 3-35PC features a low installed density and low thermal conductivity. After the initial set, QUIKLITE 3-35PC can be initially heated without using the traditional ramp-and-hold heatup schedule.
Insulating Castable
QuikLite 3A-DS
QuikLite 3A-DS
QUIKLITE 3A-DS is a dust suppressed, lightweight castable formulated for use in reducing atmospheres. This product can be installed by casting or conventional gunning methods. QUIKLITE 3A-DS features a reduced dust level and low iron oxide content. After the initial set, QUIKLITE 3A-DS can be initially heated without using the traditional ramp-and-hold heatup schedule.
QUIKLITE 3A-DS is a dust suppressed, lightweight castable formulated for use in reducing atmospheres. This product can be installed by casting or conventional gunning methods. QUIKLITE 3A-DS features a reduced dust level and low iron oxide content. After the initial set, QUIKLITE 3A-DS can be initially heated without using the traditional ramp-and-hold heatup schedule.
Insulating Castable
QUIKLITE 3B (UK)
QUIKLITE 3B (UK)
QUIKLITE 3B is a 50 lb/ft2 insulating material that is easily placed by troweling, gunning, or casting and is formulated for a rapid heatup, without using the traditional ramp-and-hold heating schedule. This ease of application combined with its good insulating values makes this an ideal choice for heaters, ducts, and other related components.
QUIKLITE 3B is a 50 lb/ft2 insulating material that is easily placed by troweling, gunning, or casting and is formulated for a rapid heatup, without using the traditional ramp-and-hold heating schedule. This ease of application combined with its good insulating values makes this an ideal choice for heaters, ducts, and other related components.
Insulating Castable
QUIKLITE 3BLI (UK)
QUIKLITE 3BLI (UK)
Quiklite 3BLI is a 1400°c low iron insulating material designed for installation by casting or gunning.It is formulated for rapid heatup without using the traditional ramp and hold heating schedule.
Insulating Castable
QuikLite 3-DS
QuikLite 3-DS
QUIKLITE 3-DS is a dust suppressed, insulating castable that can be installed by casting or conventional gunning methods. This castable features a reduced dust level, a nominal 60 pcf cast density, and good strength. After the initial set, QUIKLITE 3-DS can be initially heated without using the traditional ramp-and-hold heatup schedule.
QUIKLITE 3-DS is a dust suppressed, insulating castable that can be installed by casting or conventional gunning methods. This castable features a reduced dust level, a nominal 60 pcf cast density, and good strength. After the initial set, QUIKLITE 3-DS can be initially heated without using the traditional ramp-and-hold heatup schedule.
Insulating Castable
QuikLite 3E-DS
QuikLite 3E-DS
QUIKLITE 3E-DS is a special, dust suppressed, lightweight castable formulated for use in the petrochemical industry as a single component lining. This product can be installed by casting or conventional gunning methods. QUIKLITE 3E-DS features a reduced dust level and high strength. After the initial set, QUIKLITE 3E-DS can be initially heated without using the traditional ramp-and-hold heatup schedule. For pumping or shotcreting, QUIKLITE 3E PC is recommended.
QUIKLITE 3E-DS is a special, dust suppressed, lightweight castable formulated for use in the petrochemical industry as a single component lining. This product can be installed by casting or conventional gunning methods. QUIKLITE 3E-DS features a reduced dust level and high strength. After the initial set, QUIKLITE 3E-DS can be initially heated without using the traditional ramp-and-hold heatup schedule. For pumping or shotcreting, QUIKLITE 3E PC is recommended.
Insulating Castable
QuikLite 3PC
QuikLite 3PC
QUIKLITE 3 PC is a lightweight castable formulated to be installed by pumping or shotcreting methods. After the initial set, this unique insulating castable can be initially heated without using the traditional ramp-and-hold heatup schedule.
Insulating Castable
QuikLite 6
QuikLite 6
QUIKLITE 6 is a special high strength, medium weight insulating castable formulated primarily for use in the petrochemical industry. This product can be installed by conventional casting or gunning methods. After the initial set, QUIKLITE 6 can be heated without using the traditional ramp-and-hold heatup schedule.
QUIKLITE 6 is a special high strength, medium weight insulating castable formulated primarily for use in the petrochemical industry. This product can be installed by conventional casting or gunning methods. After the initial set, QUIKLITE 6 can be heated without using the traditional ramp-and-hold heatup schedule.
Insulating Castable
QuikLite 6PC
QuikLite 6PC
QUIKLITE 6 PC is a high strength, medium weight castable formulated to be installed by pumping or shotcreting methods. After the initial set, this unique insulating castable can be initially heated without using the traditional ramp-and-hold heatup schedule.
Insulating Castable
QuikLite 7-DS
QuikLite 7-DS
QUIKLITE 7-DS is a dust suppressed, medium weight, insulating castable that can be installed by casting or conventional gunning methods. This castable features a reduced dust level, high strength, and a low iron content. After the initial set, QUIKLITE 7-DS can be initially heated without using the traditional ramp-and-hold heatup schedule
QUIKLITE 7-DS is a dust suppressed, medium weight, insulating castable that can be installed by casting or conventional gunning methods. This castable features a reduced dust level, high strength, and a low iron content. After the initial set, QUIKLITE 7-DS can be initially heated without using the traditional ramp-and-hold heatup schedule
Insulating Castable
QuikLite 8-DS
QuikLite 8-DS
QUIKLITE 8-DS is a dust suppressed, medium weight, insulating castable that can be installed by casting or conventional gunning methods. This castable features a reduced dust level, good strength, and a low iron content which makes this product suitable for most furnace atmospheres, including CO boilers. After the initial set, QUIKLITE 8-DS can be initially heated without using the traditional ramp-and-hold heatup schedule.
QUIKLITE 8-DS is a dust suppressed, medium weight, insulating castable that can be installed by casting or conventional gunning methods. This castable features a reduced dust level, good strength, and a low iron content which makes this product suitable for most furnace atmospheres, including CO boilers. After the initial set, QUIKLITE 8-DS can be initially heated without using the traditional ramp-and-hold heatup schedule.
Insulating Castable
QuikLite 8PC
QuikLite 8PC
QUIKLITE 8PC is a high strength, medium weight castable formulated to be installed by pumping or shotcreting methods. After the initial set, this unique insulating castable can be initially heated without using the traditional ramp-and-hold heatup schedule.
Insulating Castable
QUIKLITE 9 (UK)
QUIKLITE 9 (UK)
QUIKLITE 9 is a 2600°F, 90 pcf insulating castable and is formulated for a rapid heatup, without using the traditional ramp-and-hold heating schedule. QUIKLITE 9 can be installed by both casting and gunning methods.
Insulating Castable
QuikLite 9LI-DS
QuikLite 9LI-DS
QUIKLITE 9LI-DS is a dust suppressed, medium weight, insulating castable that can be installed by casting or conventional gunning methods. This castable features a reduced dust level, high strength, and a low iron content. After the initial set, QUIKLITE 9LI-DS can be initially heated without using the traditional ramp-and-hold heatup schedule.
QUIKLITE 9LI-DS is a dust suppressed, medium weight, insulating castable that can be installed by casting or conventional gunning methods. This castable features a reduced dust level, high strength, and a low iron content. After the initial set, QUIKLITE 9LI-DS can be initially heated without using the traditional ramp-and-hold heatup schedule.
Low Cement Castable
Quikturn 32-70
Quikturn 32-70
QUIKTURN 32-70 is a low cement, 70% alumina castable that can be installed by vibration cast methods only. After the final set, this unique castable can be heated without the traditional ramp-and-hold heatup schedule. Refer to the recommended QUIKTURN heatup schedule for the initial heatup.
Low Cement Castable
Quikturn 32-70PC
Quikturn 32-70PC
QUIKTURN 32-70 PC is a low cement, 70% alumina castable that can be installed by vibration cast, pumping, and shotcreting methods. After the final set, this unique castable can be heated without the traditional ramp-and-hold heatup schedule. Refer to the recommended QUIKTURN heatup schedule for the initial heatup.
QUIKTURN 32-70 PC is a low cement, 70% alumina castable that can be installed by vibration cast, pumping, and shotcreting methods. After the final set, this unique castable can be heated without the traditional ramp-and-hold heatup schedule. Refer to the recommended QUIKTURN heatup schedule for the initial heatup.
Low Cement Castable
Quikturn 45G
Quikturn 45G
QUIKTURN 45G is an ultra-low cement, 47% alumina gun mix that is installed by conventional gunning methods. After the final set, this unique castable can be heated without the traditional ramp-and-hold heatup schedule. Refer to the recommended QUIKTURN heatup schedule for the initial heatup.
QUIKTURN 45G is an ultra-low cement, 47% alumina gun mix that is installed by conventional gunning methods. After the final set, this unique castable can be heated without the traditional ramp-and-hold heatup schedule. Refer to the recommended QUIKTURN heatup schedule for the initial heatup.
Low Cement Castable
Quikturn 60G
Quikturn 60G
QUIKTURN 60G is a mullite-based, low cement, 60% alumina low cement gun mix that can be installed by conventional gunning methods. After the final set, this unique castable can be heated without the traditional ramp-and-hold heatup schedule. Refer to the recommended QUIKTURN heatup schedule for the initial heatup.
QUIKTURN 60G is a mullite-based, low cement, 60% alumina low cement gun mix that can be installed by conventional gunning methods. After the final set, this unique castable can be heated without the traditional ramp-and-hold heatup schedule. Refer to the recommended QUIKTURN heatup schedule for the initial heatup.
Low Cement Castable
Quikturn 60G (UK)
Quikturn 60G (UK)
QUIKTURN 60G is a mullite-based, low cement, 60% alumina low cement gun mix that can be installed by conventional gunning methods. After the final set, this unique castable can be heated without the traditional ramp-and-hold heatup schedule. Refer to the recommended QUIKTURN heatup schedule for the initial heatup.
QUIKTURN 60G is a mullite-based, low cement, 60% alumina low cement gun mix that can be installed by conventional gunning methods. After the final set, this unique castable can be heated without the traditional ramp-and-hold heatup schedule. Refer to the recommended QUIKTURN heatup schedule for the initial heatup.
Low Cement Castable
Quikturn 60LQY PC
Quikturn 60LQY PC
An alkali-resistant 60% alumina castable that can be installed using vibration casting, pumping, or wet shotcreting methods. This product has been formulated to be resistant to alkali attack. After the final set, this unique castable can be heated without the traditional ramp-and-hold heatup schedule.
An alkali-resistant 60% alumina castable that can be installed using vibration casting, pumping, or wet shotcreting methods. This product has been formulated to be resistant to alkali attack. After the final set, this unique castable can be heated without the traditional ramp-and-hold heatup schedule.
Low Cement Castable
Quikturn 60PC
Quikturn 60PC
QUIKTURN 60PC is a mullite-based, low cement, 60% alumina castable that can be installed by vibration cast, pumping, and shotcreting methods. After the final set, this unique castable can be heated without the traditional ramp-and-hold heatup schedule. Refer to the recommended QUIKTURN heatup schedule for the initial heatup.
QUIKTURN 60PC is a mullite-based, low cement, 60% alumina castable that can be installed by vibration cast, pumping, and shotcreting methods. After the final set, this unique castable can be heated without the traditional ramp-and-hold heatup schedule. Refer to the recommended QUIKTURN heatup schedule for the initial heatup.
Alumina Brick
Rescal 10 CRSR
Rescal 10 CRSR
Burned, shock resistant, alumina chrome brick
Alumina Brick
Rescal 70D
Rescal 70D
High alumina brick
Alumina Brick
Rescal 85 B
Rescal 85 B
High alumina, high strength brick
Alumina Brick
Rescal 90 XD-G
Rescal 90 XD-G
Burned, high alumina brick
Shotcrete Activator
Resco SC-1
Resco SC-1
Chemically Bonded Castables
Rescobond 3000
Rescobond 3000
RESCOBOND 3000 is a chemically-bonded, air-setting, single component refractory castable. This product bonds to existing refractory and can be used in a variety of different applications including patching. To use, mix RESCOBOND 3000 with water and cast. It develops a quick set and can be heated shortly after installation.
RESCOBOND 3000 is a chemically-bonded, air-setting, single component refractory castable. This product bonds to existing refractory and can be used in a variety of different applications including patching. To use, mix RESCOBOND 3000 with water and cast. It develops a quick set and can be heated shortly after installation.
Chemically Bonded Castables
Rescobond 3000 (UK)
Rescobond 3000 (UK)
RESCOBOND 3000 is a chemically-bonded, air-setting, single component refractory castable. This product bonds to existing refractory and can be used in a variety of different applications including patching. To use, mix RESCOBOND 3000 with water and cast. It develops a quick set and can be heated shortly after installation.
RESCOBOND 3000 is a chemically-bonded, air-setting, single component refractory castable. This product bonds to existing refractory and can be used in a variety of different applications including patching. To use, mix RESCOBOND 3000 with water and cast. It develops a quick set and can be heated shortly after installation.
Chemically Bonded Castables
Rescobond 3000G
Rescobond 3000G
RESCOBOND 3000G is a chemically-bonded, air-setting, single component gunning mix. This product can be installed by conventional gunning and handpacking methods and bonds to existing refractory. When gunning, predampening is NOT suggested for this gun mix. This product develops a quick set and can be heated shortly after installation. RESCOBOND 3000G should NOT be installed by vibration casting methods.
RESCOBOND 3000G is a chemically-bonded, air-setting, single component gunning mix. This product can be installed by conventional gunning and handpacking methods and bonds to existing refractory. When gunning, predampening is NOT suggested for this gun mix. This product develops a quick set and can be heated shortly after installation. RESCOBOND 3000G should NOT be installed by vibration casting methods.
Chemically Bonded Castables
Rescobond 3000G (UK)
Rescobond 3000G (UK)
RESCOBOND 3000G is a chemically-bonded, air-setting, single component gunning mix. This product can be installed by conventional gunning and handpacking methods and bonds to existing refractory. When gunning, predampening is NOT suggested for this gun mix. This product develops a quick set and can be heated shortly after installation. RESCOBOND 3000G should NOT be installed by vibration casting methods.
RESCOBOND 3000G is a chemically-bonded, air-setting, single component gunning mix. This product can be installed by conventional gunning and handpacking methods and bonds to existing refractory. When gunning, predampening is NOT suggested for this gun mix. This product develops a quick set and can be heated shortly after installation. RESCOBOND 3000G should NOT be installed by vibration casting methods.
Chemically Bonded Castables
Rescobond 90
Rescobond 90
RESCOBOND 90 is a chemically-bonded, air-setting, single component, high purity alumina refractory castable. This product bonds to existing refractory and can be used in a variety of different applications including patching. To use, mix RESCOBOND 90 with water and cast. It develops a quick set and can be heated shortly after installation.
RESCOBOND 90 is a chemically-bonded, air-setting, single component, high purity alumina refractory castable. This product bonds to existing refractory and can be used in a variety of different applications including patching. To use, mix RESCOBOND 90 with water and cast. It develops a quick set and can be heated shortly after installation.
Conventional Castable
Rescocast 15GM
Rescocast 15GM
RESCOCAST 15GM is a 2600°F general duty castable that can be installed by vibration casting methods. It is designed for refractory use in powerplant ash-hopper applications as well as other applications where high strength, moderate abrasion resistance, and medium insulating values are required. RESCOCAST 15GM is also an excellent gunning product that can be troweled too.
RESCOCAST 15GM is a 2600°F general duty castable that can be installed by vibration casting methods. It is designed for refractory use in powerplant ash-hopper applications as well as other applications where high strength, moderate abrasion resistance, and medium insulating values are required. RESCOCAST 15GM is also an excellent gunning product that can be troweled too.
Conventional Castable
Rescocast 17AC
Rescocast 17AC
RESCOCAST 17AC is a high temperature, high purity alumina conventional castable with only trace amounts of silica and iron oxide. The high purity of this castable makes it an ideal choice for reducing atmospheres containing hydrogen and/or carbon monoxide. This product should be installed using vibration casting methods.
RESCOCAST 17AC is a high temperature, high purity alumina conventional castable with only trace amounts of silica and iron oxide. The high purity of this castable makes it an ideal choice for reducing atmospheres containing hydrogen and/or carbon monoxide. This product should be installed using vibration casting methods.
Conventional Castable
Rescocast 17AC (UK)
Rescocast 17AC (UK)
RESCOCAST 17AC is a high temperature, high purity alumina conventional castable with only trace amounts of silica and iron oxide. The high purity of this castable makes it an ideal choice for reducing atmospheres containing hydrogen and/or carbon monoxide. This product should be installed using vibration casting methods.
RESCOCAST 17AC is a high temperature, high purity alumina conventional castable with only trace amounts of silica and iron oxide. The high purity of this castable makes it an ideal choice for reducing atmospheres containing hydrogen and/or carbon monoxide. This product should be installed using vibration casting methods.
Conventional Castable
Rescocast 17AC Coarse
Rescocast 17AC Coarse
RESCOCAST 17AC COARSE is a high purity, low iron, low silica hydraulic setting castable that contains a coarse aggregate. Low iron and low silica contents of less than 0.1 to 0.2 percent make RESCOCAST 17AC COARSE an ideal choice for reducing atmospheres such as hydrogen and/or carbon monoxide.
RESCOCAST 17AC COARSE is a high purity, low iron, low silica hydraulic setting castable that contains a coarse aggregate. Low iron and low silica contents of less than 0.1 to 0.2 percent make RESCOCAST 17AC COARSE an ideal choice for reducing atmospheres such as hydrogen and/or carbon monoxide.
Conventional Castable
Rescocast 17EC
Rescocast 17EC
RESCOCAST 17EC is a casting grade refractory that has been vibrated in U-Bends, YSections, overhead lines, and other catalyst transfer lines throughout the world. Extended working time and ease of placement with vibration has made RESCOCAST 17EC the "Specified" material. Resco Quality Control monitors erosion testing results, thus guaranteeing a product that meets severe petrochemical service conditions.
RESCOCAST 17EC is a casting grade refractory that has been vibrated in U-Bends, YSections, overhead lines, and other catalyst transfer lines throughout the world. Extended working time and ease of placement with vibration has made RESCOCAST 17EC the "Specified" material. Resco Quality Control monitors erosion testing results, thus guaranteeing a product that meets severe petrochemical service conditions.
Conventional Castable
Rescocast 17EC (UK)
Rescocast 17EC (UK)
RESCOCAST 17EC is a casting grade refractory that has been vibrated in U-Bends, YSections, overhead lines, and other catalyst transfer lines throughout the world. Extended working time and ease of placement with vibration has made RESCOCAST 17EC the "Specified" material. Resco Quality Control monitors erosion testing results, thus guaranteeing a product that meets severe petrochemical service conditions.
RESCOCAST 17EC is a casting grade refractory that has been vibrated in U-Bends, YSections, overhead lines, and other catalyst transfer lines throughout the world. Extended working time and ease of placement with vibration has made RESCOCAST 17EC the "Specified" material. Resco Quality Control monitors erosion testing results, thus guaranteeing a product that meets severe petrochemical service conditions.
Conventional Castable
Rescocast 17EG
Rescocast 17EG
RESCOCAST 17EG is an erosion resistant gunning mix refractory that has been formulated to have improved gunning characteristics and excellent physical properties. Data shown below are average results of tests following the guidelines set forth in ASTM C-903 "Preparing Refractory Concrete Specimens by Cold Gunning".
RESCOCAST 17EG is an erosion resistant gunning mix refractory that has been formulated to have improved gunning characteristics and excellent physical properties. Data shown below are average results of tests following the guidelines set forth in ASTM C-903 "Preparing Refractory Concrete Specimens by Cold Gunning".
Conventional Castable
Rescocast 17EG (UK)
Rescocast 17EG (UK)
RESCOCAST 17EG is an erosion resistant gunning mix refractory that has been formulated to have improved gunning characteristics and excellent physical properties. Data shown below are average results of tests following the guidelines set forth in ASTM C-903 "Preparing Refractory Concrete Specimens by Cold Gunning".
RESCOCAST 17EG is an erosion resistant gunning mix refractory that has been formulated to have improved gunning characteristics and excellent physical properties. Data shown below are average results of tests following the guidelines set forth in ASTM C-903 "Preparing Refractory Concrete Specimens by Cold Gunning".
Insulating Castable
Rescocast 3
Rescocast 3
RESCOCAST 3 is a high performance insulating castable designed for a variety of applications. Its density is approximately 60 lb/ft3 and offers superior strength characteristics, as well as a high strength-to-insulation ratio. This material can be used as an original lining material or as a replacement for refractory ceramic fiber. RESCOCAST 3 can be installed by either gunning or casting methods. For pumpcasting or shotcreting applications, RESCOCAST 3 PC is recommended.
RESCOCAST 3 is a high performance insulating castable designed for a variety of applications. Its density is approximately 60 lb/ft3 and offers superior strength characteristics, as well as a high strength-to-insulation ratio. This material can be used as an original lining material or as a replacement for refractory ceramic fiber. RESCOCAST 3 can be installed by either gunning or casting methods. For pumpcasting or shotcreting applications, RESCOCAST 3 PC is recommended.
Insulating Castable
Rescocast 3 (UK)
Rescocast 3 (UK)
RESCOCAST 3 is a high performance insulating castable designed for a variety of applications. Its density is approximately 60 lb/ft3 and offers superior strength characteristics, as well as a high strength-to-insulation ratio. This material can be used as an original lining material or as a replacement for refractory ceramic fiber. RESCOCAST 3 can be installed by either gunning or casting methods. For pumpcasting or shotcreting applications, RESCOCAST 3 PC is recommended.
RESCOCAST 3 is a high performance insulating castable designed for a variety of applications. Its density is approximately 60 lb/ft3 and offers superior strength characteristics, as well as a high strength-to-insulation ratio. This material can be used as an original lining material or as a replacement for refractory ceramic fiber. RESCOCAST 3 can be installed by either gunning or casting methods. For pumpcasting or shotcreting applications, RESCOCAST 3 PC is recommended.
Insulating Castable
Rescocast 3-20R
Rescocast 3-20R
RESCOCAST 3-20R is a lightweight insulating material designed to replace insulating block. Its low density results in very low “K” factors for super insulation. It can be used as a back up material in bi-wall linings or as a single component lining where the temperatures are not to exceed 2000°F.
RESCOCAST 3-20R is a lightweight insulating material designed to replace insulating block. Its low density results in very low “K” factors for super insulation. It can be used as a back up material in bi-wall linings or as a single component lining where the temperatures are not to exceed 2000°F.
Insulating Castable
Rescocast 3-35
Rescocast 3-35
RESCOCAST 3-35 is an insulating castable with an operating temperature up to 2000°F, with a good strength to density ratio. It has been used as an insulating material in bi-wall linings and also as a single component lining where erosive conditions are not too severe. Unlike loose fill or insulating block, RESCOCAST 3-35 will not settle or disintegrate under adverse conditions.
RESCOCAST 3-35 is an insulating castable with an operating temperature up to 2000°F, with a good strength to density ratio. It has been used as an insulating material in bi-wall linings and also as a single component lining where erosive conditions are not too severe. Unlike loose fill or insulating block, RESCOCAST 3-35 will not settle or disintegrate under adverse conditions.
Insulating Castable
Rescocast 3-35P
Rescocast 3-35P
RESCOCAST 3-35P is an insulating castable with an operating temperature up to 2000°F, with a good strength to density ratio. It has been used as an insulating material in bi-wall linings and also as a single component lining where erosive conditions are not too severe. Unlike loose fill or insulating block, RESCOCAST 3-35P will not settle or disintegrate under adverse conditions.
RESCOCAST 3-35P is an insulating castable with an operating temperature up to 2000°F, with a good strength to density ratio. It has been used as an insulating material in bi-wall linings and also as a single component lining where erosive conditions are not too severe. Unlike loose fill or insulating block, RESCOCAST 3-35P will not settle or disintegrate under adverse conditions.
Insulating Castable
Rescocast 3-35PC
Rescocast 3-35PC
RESCOCAST 3-35PC is an insulating castable with an operating temperature up to 2000°F, and a good strength to density ratio. It can be used as an insulating material in bi-wall linings and also as a single component lining, where erosive conditions are not too severe. Unlike loose fill or soft insulating block, RESCOCAST 3-35PC will not settle or disintegrate under adverse conditions
RESCOCAST 3-35PC is an insulating castable with an operating temperature up to 2000°F, and a good strength to density ratio. It can be used as an insulating material in bi-wall linings and also as a single component lining, where erosive conditions are not too severe. Unlike loose fill or soft insulating block, RESCOCAST 3-35PC will not settle or disintegrate under adverse conditions
Insulating Castable
Rescocast 3A
Rescocast 3A
RESCOCAST 3A is a lightweight, low iron, insulating castable which has a service limit temperature of 2500°F. It is used primarily where reducing atmospheres may be present. RESCOCAST 3A can be installed by either gunning or casting methods.
Insulating Castable
Rescocast 3A (UK)
Rescocast 3A (UK)
RESCOCAST 3A is a lightweight, low iron, insulating castable which has a service limit temperature of 2500°F. It is used primarily where reducing atmospheres may be present. RESCOCAST 3A can be installed by either gunning or casting methods.
Insulating Castable
RESCOCAST 3B
RESCOCAST 3B
RESCOCAST 3B insulating castable is a 50 pcf density castable that can be installed by troweling, casting or conventional gunning methods
Insulating Castable
Rescocast 4LI
Rescocast 4LI
RESCOCAST 4LI, a low iron, high purity, lightweight insulating castable, is especially formulated for use in controlled atmospheres such as methane, hydrogen, and carbon monoxide. RESCOCAST 4LI has been used in many heater applications, such as pre-fabricated panels, resulting in minimum downtime. RESCOCAST 4LI can be installed by either gunning or casting methods.
RESCOCAST 4LI, a low iron, high purity, lightweight insulating castable, is especially formulated for use in controlled atmospheres such as methane, hydrogen, and carbon monoxide. RESCOCAST 4LI has been used in many heater applications, such as pre-fabricated panels, resulting in minimum downtime. RESCOCAST 4LI can be installed by either gunning or casting methods.
Insulating Castable
Rescocast 6
Rescocast 6
RESCOCAST 6 is a high strength, special medium-weight heat insulating castable designed primarily for use in the petrochemical industry where higher strength and temperature requirements are needed. RESCOCAST 6 can be installed by both gunning and casting methods. For pumpcasting or shotcreting applications, RESCOCAST 6PC is recommended.
RESCOCAST 6 is a high strength, special medium-weight heat insulating castable designed primarily for use in the petrochemical industry where higher strength and temperature requirements are needed. RESCOCAST 6 can be installed by both gunning and casting methods. For pumpcasting or shotcreting applications, RESCOCAST 6PC is recommended.
Insulating Castable
Rescocast 6 (UK)
Rescocast 6 (UK)
RESCOCAST 6 is a high strength, special medium-weight heat insulating castable designed primarily for use in the petrochemical industry where higher strength and temperature requirements are needed. RESCOCAST 6 can be installed by both gunning and casting methods. For pumpcasting or shotcreting applications, RESCOCAST 6PC is recommended.
RESCOCAST 6 is a high strength, special medium-weight heat insulating castable designed primarily for use in the petrochemical industry where higher strength and temperature requirements are needed. RESCOCAST 6 can be installed by both gunning and casting methods. For pumpcasting or shotcreting applications, RESCOCAST 6PC is recommended.
Insulating Castable
Rescocast 6PC
Rescocast 6PC
RESCOCAST 6PC is a high strength, medium weight insulating castable designed primarily for pumpcasting and shotcreting installation methods. RESCOCAST 6PC can also be installed using standard casting methods. It has been applied by pumpcasting on both regenerator and reactor vessel walls, as well as in fired heaters. Pumpcasting and shotcreting methods produce a uniform, lamination free lining when compared to gunned linings.
RESCOCAST 6PC is a high strength, medium weight insulating castable designed primarily for pumpcasting and shotcreting installation methods. RESCOCAST 6PC can also be installed using standard casting methods. It has been applied by pumpcasting on both regenerator and reactor vessel walls, as well as in fired heaters. Pumpcasting and shotcreting methods produce a uniform, lamination free lining when compared to gunned linings.
Insulating Castable
Rescocast 7
Rescocast 7
RESCOCAST 7 is the original "one shot" lining material for use in FCC regenerator and reactor vessel walls. Good strength combined with better insulating qualities and an economical cost make RESCOCAST 7 an ideal choice for many applications. Although primarily used as a gunning material, it can also be cast or troweled into place.
RESCOCAST 7 is the original "one shot" lining material for use in FCC regenerator and reactor vessel walls. Good strength combined with better insulating qualities and an economical cost make RESCOCAST 7 an ideal choice for many applications. Although primarily used as a gunning material, it can also be cast or troweled into place.
Insulating Castable
Rescocast 7 (UK)
Rescocast 7 (UK)
RESCOCAST 7 is the original "one shot" lining material for use in FCC regenerator and reactor vessel walls. Good strength combined with better insulating qualities and an economical cost make RESCOCAST 7 an ideal choice for many applications. Although primarily used as a gunning material, it can also be cast or troweled into place.
RESCOCAST 7 is the original "one shot" lining material for use in FCC regenerator and reactor vessel walls. Good strength combined with better insulating qualities and an economical cost make RESCOCAST 7 an ideal choice for many applications. Although primarily used as a gunning material, it can also be cast or troweled into place.
Insulating Castable
Rescocast 8
Rescocast 8
RESCOCAST 8 is a medium weight, insulating castable with a service limit temperature of 2800°F. A low iron content makes it suitable for most furnace atmospheres, including CO Boilers. RESCOCAST 8 can be installed by either casting or gunning.
Insulating Castable
Rescocast 8 (UK)
Rescocast 8 (UK)
RESCOCAST 8 is a medium weight, insulating castable with a service limit temperature of 2800°F. A low iron content makes it suitable for most furnace atmospheres, including CO Boilers. RESCOCAST 8 can be installed by either casting or gunning.
Insulating Castable
Rescocast 9LI
Rescocast 9LI
RESCOCAST 9LI combines the qualities of an insulating and a general duty castable. High strength and good protection against heat loss have made this product an ideal choice for the gunning of FCC regenerator and reactor walls. RESCOCAST 9LI has been used throughout the world for this and other critical applications. RESCOCAST 9LI can be installed by either casting or gunning. For pumpcasting or shotcreting applications, Rescocast 9LI PC is recommended.
RESCOCAST 9LI combines the qualities of an insulating and a general duty castable. High strength and good protection against heat loss have made this product an ideal choice for the gunning of FCC regenerator and reactor walls. RESCOCAST 9LI has been used throughout the world for this and other critical applications. RESCOCAST 9LI can be installed by either casting or gunning. For pumpcasting or shotcreting applications, Rescocast 9LI PC is recommended.
Plastic
Rescoram 10CR
Rescoram 10CR
RESCORAM 10 CR is a high alumina, phosphate-bonded plastic with 10% chromic oxide that is used throughout the metals producing industries. Its chemical bond develops high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics.
RESCORAM 10 CR is a high alumina, phosphate-bonded plastic with 10% chromic oxide that is used throughout the metals producing industries. Its chemical bond develops high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics.
Plastic
Rescoram 20CR
Rescoram 20CR
RESCORAM 20CR is a Phosphate-Bonded Alumina-Chrome Plastic that contains 20% chromic oxide, for increased slag and corrosion resistance.
Plastic
Rescoram 60
Rescoram 60
RESCORAM 60 is a high alumina, phosphate-bonded plastic that offers excellent resistance to alkali attack. Phosphate bonding allows RESCORAM 60 to develop high strength at lower temperatures.
Plastic
Rescoram 70 Blue
Rescoram 70 Blue
RESCORAM 70 BLUE is a mullite, phosphate-bonded plastic material that is used throughout the metals, power, cement, and lime producing industries. Its chemical bond develops high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics. This product is designed to resist alkali attack.
RESCORAM 70 BLUE is a mullite, phosphate-bonded plastic material that is used throughout the metals, power, cement, and lime producing industries. Its chemical bond develops high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics. This product is designed to resist alkali attack.
Plastic
Rescoram 70SC
Rescoram 70SC
RESCORAM 70 SC is a 70% silicon carbide, phosphate-bonded plastic material that is used throughout the metals, power, cement, and lime producing industries. Its chemical bond develops high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics.
RESCORAM 70 SC is a 70% silicon carbide, phosphate-bonded plastic material that is used throughout the metals, power, cement, and lime producing industries. Its chemical bond develops high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics.
Plastic
Rescoram 7CR
Rescoram 7CR
RESCORAM 7 CR is a high alumina, phosphate-bonded plastic with 7% chromic oxide that is used throughout the metals producing industries. RESCORAM 7 CR has a chemical bond that develops a high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics.
RESCORAM 7 CR is a high alumina, phosphate-bonded plastic with 7% chromic oxide that is used throughout the metals producing industries. RESCORAM 7 CR has a chemical bond that develops a high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics.
Plastic
Rescoram 85
Rescoram 85
RESCORAM 85 is a high alumina, phosphate-bonded plastic material that is used throughout the metals, power, cement, and lime producing industries. Its chemical bond develops high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics.
RESCORAM 85 is a high alumina, phosphate-bonded plastic material that is used throughout the metals, power, cement, and lime producing industries. Its chemical bond develops high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics.
Plastic
Rescoram 85S
Rescoram 85S
Phosphate bonded alumina plastic
Plastic
Rescoram 90
Rescoram 90
RESCORAM 90 is a high alumina, phosphate-bonded plastic material that is used throughout the metals, power, cement, and lime producing industries. Its chemical bond develops high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics.
RESCORAM 90 is a high alumina, phosphate-bonded plastic material that is used throughout the metals, power, cement, and lime producing industries. Its chemical bond develops high strength at lower temperatures. This property makes it ideal for application where there is insufficient heat to develop the ceramic bond required in heat-setting plastics.
Wet Mortar
Rescoset 10CR Dip
Rescoset 10CR Dip
Rescoset 10CR is a wet high alumina-chrome oxide bonding mortar with a chemical bonding system. With the unique bonding system, high strength is developed at lower temperatures (300-600°F) and continues until a ceramic bonding occurs. Rescoset 10CR is primarily used to lay up alumina-chrome brick oxide and is available in a troweling consistency. It is recommended in areas where severe service conditions require increased refractoriness and corrosion/erosion resistance.
Rescoset 10CR is a wet high alumina-chrome oxide bonding mortar with a chemical bonding system. With the unique bonding system, high strength is developed at lower temperatures (300-600°F) and continues until a ceramic bonding occurs. Rescoset 10CR is primarily used to lay up alumina-chrome brick oxide and is available in a troweling consistency. It is recommended in areas where severe service conditions require increased refractoriness and corrosion/erosion resistance.
Wet Mortar
Rescoset 10CR TR-D3
Rescoset 10CR TR-D3
Rescoset 10CR is a wet high alumina-chrome oxide bonding mortar with a chemical bonding system. With the unique bonding system, high strength is developed at lower temperatures (300-600°F) and continues until a ceramic bonding occurs. Rescoset 10CR is primarily used to lay up alumina-chrome brick oxide and is available in a troweling consistency. It is recommended in areas where severe service conditions require increased refractoriness and corrosion/erosion resistance.
Rescoset 10CR is a wet high alumina-chrome oxide bonding mortar with a chemical bonding system. With the unique bonding system, high strength is developed at lower temperatures (300-600°F) and continues until a ceramic bonding occurs. Rescoset 10CR is primarily used to lay up alumina-chrome brick oxide and is available in a troweling consistency. It is recommended in areas where severe service conditions require increased refractoriness and corrosion/erosion resistance.
Wet Mortar
Rescoset 3000 TR-D3.5
Rescoset 3000 TR-D3.5
RESCOSET 3000 is a super duty, air-setting bonding mortar with a maximum recommended service temperature of 3000°F. It is shipped as a wet, ready to use mortar and will stay in suspension over long periods of time.
Wet Mortar
Rescoset 50M TR-D3
Rescoset 50M TR-D3
RESCOSET 50M is a high alumina class, mullite based, air-setting bonding mortar with a maximum recommended service temperature of 3000°F. It is shipped as a wet, ready to use mortar and will stay in suspension over long periods of time.
Wet Mortar
Rescoset 80P TR-D3
Rescoset 80P TR-D3
Rescoset 80P is a wet high alumina bonding mortar with improved shelf life. With the unique chemical bonding system, high bonding strength is developed at lower temperatures (300-600°F) and continues until a ceramic bonding occurs. Rescoset 80P is primarily used to lay up high alumina brick and is available in troweling and dipping consistency. It is used in areas where severe service conditions require increased refractoriness and corrosion/erosion resistance.
Rescoset 80P is a wet high alumina bonding mortar with improved shelf life. With the unique chemical bonding system, high bonding strength is developed at lower temperatures (300-600°F) and continues until a ceramic bonding occurs. Rescoset 80P is primarily used to lay up high alumina brick and is available in troweling and dipping consistency. It is used in areas where severe service conditions require increased refractoriness and corrosion/erosion resistance.
Wet Mortar
Rescoset 85AS TR
Rescoset 85AS TR
Wet, air-setting, 85% alumina bonding mortar with a low silica content
Wet Mortar
Rescoset 90P TR-D3
Rescoset 90P TR-D3
Rescoset 90P is a wet high alumina bonding mortar with a chemical bonding system. With the unique bonding system, high bonding strength is developed at lower temperatures (300-600°F) and continues until a ceramic bonding occurs. Rescoset 90P is primarily used to lay up high alumina brick and is available in troweling consistency. It is used in areas where severe service conditions require increased refractoriness and corrosion/erosion resistance
Rescoset 90P is a wet high alumina bonding mortar with a chemical bonding system. With the unique bonding system, high bonding strength is developed at lower temperatures (300-600°F) and continues until a ceramic bonding occurs. Rescoset 90P is primarily used to lay up high alumina brick and is available in troweling consistency. It is used in areas where severe service conditions require increased refractoriness and corrosion/erosion resistance
Wet Mortar
Rescoset MD TR
Rescoset MD TR
RESCOSET MD is an air-setting bonding mortar with a maximum recommended service temperature of 2800°F. It is shipped as a wet, ready to use mortar and will stay in suspension over long periods of time.
Wet Mortar
RESCOSET MD-TR-D4
RESCOSET MD-TR-D4
RESCOSET MD is an air-setting bonding mortar with a maximum recommended service temperature of 2800°F. It is shipped as a wet, ready to use mortar and will stay in suspension over long periods of time.
Low Cement Castable
R-Max C (ESC)
R-Max C (ESC)
R-MAX C is a Abrasion-Resistant, Low Cement 70% Alumina Castable. This castable should be installed by vibration casting only; specifically form vibration.
Low Cement Castable
R-Max G (ESC)
R-Max G (ESC)
R-MAX G is a 3200 °F high performance gunning mix designed to provide maximum abrasion resistance and excellent strengths throughout all operating temperatures. RMax G should be installed using conventional gunning methods. The data shown are average test results following the guidelines set forth in ASTM C-903; “Preparing Refractory Concrete Specimens by Cold Gunning”.
R-MAX G is a 3200 °F high performance gunning mix designed to provide maximum abrasion resistance and excellent strengths throughout all operating temperatures. RMax G should be installed using conventional gunning methods. The data shown are average test results following the guidelines set forth in ASTM C-903; “Preparing Refractory Concrete Specimens by Cold Gunning”.
Low Cement Castable
R-Max G QT
R-Max G QT
R-MAX G QT is a high performance gunning mix designed to provide high abrasion resistance and excellent strengths. R-Max G QT should be installed using conventional gunning methods. After the final set, this unique gun mix can be heated without the traditional controlled heating schedule. Ideal applications for this product include areas of severe abrasion, where refractory heatup is difficult to control or a shorter heatup schedule is desired.
R-MAX G QT is a high performance gunning mix designed to provide high abrasion resistance and excellent strengths. R-Max G QT should be installed using conventional gunning methods. After the final set, this unique gun mix can be heated without the traditional controlled heating schedule. Ideal applications for this product include areas of severe abrasion, where refractory heatup is difficult to control or a shorter heatup schedule is desired.
Low Cement Castable
R-Max PC
R-Max PC
R-MAX PC is a Pumpable, Abrasion-Resistant, 70% Alumina Castable. This castable can be installed by vibration casting, pumping, or shotcreting methods
Low Cement Castable
R-Max PC QT
R-Max PC QT
R-MAX PC QT is a Pumpable, Abrasion-Resistant, 80% Alumina Castable. This castable can be installed by vibration casting and pumping methods. Ideal applications for this castable are severe abrasion areas where refractory heatup is difficult to control.
Low Cement Castable
R-Max SF
R-Max SF
A self leveling, 92% alumina castable with maximum erosion resistance, that can installed using the products’s self leveling characteristic or pumpcasting methods. This product should be used in areas subjected to severe abrasion. It is suggested that vibration should not be used during installation since it is a self leveling product.
A self leveling, 92% alumina castable with maximum erosion resistance, that can installed using the products’s self leveling characteristic or pumpcasting methods. This product should be used in areas subjected to severe abrasion. It is suggested that vibration should not be used during installation since it is a self leveling product.
Alumina Brick
Seneca 60 P
Seneca 60 P
Burned, high alumina brick
Wet Mortar
Super Adamant TR
Super Adamant TR
SUPER ADAMANT is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. SUPER ADAMANT has a maximum recommended service temperature of 3000oF. The product has excellent slag resistance, and its low iron content makes it ideal for reducing atmospheres. It has the same smooth working characteristics built into all RESCO mortars and has been used successfully in blast furnaces, hot metal mixers, electric furnace roofs, soaking pits, stopper rods, ladles, and other applications where severe conditions exist.
SUPER ADAMANT is a wet ready-mixed high alumina based bonding mortar available in either trowel or dipping consistencies. SUPER ADAMANT has a maximum recommended service temperature of 3000oF. The product has excellent slag resistance, and its low iron content makes it ideal for reducing atmospheres. It has the same smooth working characteristics built into all RESCO mortars and has been used successfully in blast furnaces, hot metal mixers, electric furnace roofs, soaking pits, stopper rods, ladles, and other applications where severe conditions exist.
Low Cement Castable
SUREFLOW 56SC (UK)
SUREFLOW 56SC (UK)
Sureflow 56 SC is a silicon carbide based low cement castable specifically designed for installation by self flow casting. Its high thermal conductivity makes it ideal for applications where high heat transfer is important. Sureflow 56 SC shows excellent resistance to abrasion, thermal spalling and corrosion, combined with super high fired strengths.
Sureflow 56 SC is a silicon carbide based low cement castable specifically designed for installation by self flow casting. Its high thermal conductivity makes it ideal for applications where high heat transfer is important. Sureflow 56 SC shows excellent resistance to abrasion, thermal spalling and corrosion, combined with super high fired strengths.
Low Cement Castable
SUREFLOW 70SC (UK)
SUREFLOW 70SC (UK)
Sureflow 70SC is a silicon carbide based low cement castable specifically designed for installation by self flow casting. Its high thermal conductivity makes it ideal for applications where high heat transfer is important. Sureflow 70SC shows excellent resistance to abrasion, thermal spalling and corrosion, combined with super high fired strengths.
Sureflow 70SC is a silicon carbide based low cement castable specifically designed for installation by self flow casting. Its high thermal conductivity makes it ideal for applications where high heat transfer is important. Sureflow 70SC shows excellent resistance to abrasion, thermal spalling and corrosion, combined with super high fired strengths.
Wet Mortar
Trowleze TR
Trowleze TR
TROWLEZE® Is a 40% alumina, versatile bonding mortar with exceptional troweling and buttering workability. It adheres to the trowel so it can be picked up and transferred to the brick without difficulty. It provides a strong, air-set bond and an even stronger ceramic bond upon firing. It has excellent volume stability, minimum shrinkage, high refractoriness to 3000ºF, uniform workability, good water retention, and thorough coverage for economical use. Use with high duty, superduty, 50% alumina, and 60% alumina brick. It is the recommended mortar of choice for installing insulating firebrick.
TROWLEZE® Is a 40% alumina, versatile bonding mortar with exceptional troweling and buttering workability. It adheres to the trowel so it can be picked up and transferred to the brick without difficulty. It provides a strong, air-set bond and an even stronger ceramic bond upon firing. It has excellent volume stability, minimum shrinkage, high refractoriness to 3000ºF, uniform workability, good water retention, and thorough coverage for economical use. Use with high duty, superduty, 50% alumina, and 60% alumina brick. It is the recommended mortar of choice for installing insulating firebrick.
Low Cement Castable
Vibrocast 2800
Vibrocast 2800
VIBROCAST 2800 is an economical 2800°F low cement castable designed to yield high fired strengths at maximum density. This product should be installed by vibration casting methods only.
Low Cement Castable
Vibrocast 3000
Vibrocast 3000
VIBROCAST 3000 is an economical, Low Cement, 45% Alumina castable that can be installed by vibration cast methods only.
Low Cement Castable
Vibrocast 50
Vibrocast 50
VIBROCAST 50 is a Low Cement, 45% Alumina castable that can be installed by vibration cast methods only.
Low Cement Castable
Vibrocast 50 (UK)
Vibrocast 50 (UK)
VIBROCAST 50 is a Low Cement, 45% Alumina castable that can be installed by vibration cast methods only.
Low Cement Castable
Vibrocast 50PC
Vibrocast 50PC
VIBROCAST 50PC is a Pumpable, Low Cement, 45% Alumina castable that can be installed by vibration casting, pumping, and shotcreting methods. It offers excellent resistance to alkalis and requires substantially less vibration than standard low cement castables.
Low Cement Castable
Vibrocast 56SC
Vibrocast 56SC
VIBROCAST 56SC is a SiC castable that uses low cement binder technology. Its low porosity, excellent abrasion resistance and high heat transfer value make this product an excellent choice for the combustion zones of POWER GENERATION units and for the riser lines and preheater sections of CEMENT PLANTS. The high heat transfer characteristic of the SiC reduces surface slagging and alkali build-up, thereby, improving the operating efficiency of your unit. Vibrocast 56SC is best applied by vibration casting.
VIBROCAST 56SC is a SiC castable that uses low cement binder technology. Its low porosity, excellent abrasion resistance and high heat transfer value make this product an excellent choice for the combustion zones of POWER GENERATION units and for the riser lines and preheater sections of CEMENT PLANTS. The high heat transfer characteristic of the SiC reduces surface slagging and alkali build-up, thereby, improving the operating efficiency of your unit. Vibrocast 56SC is best applied by vibration casting.
Low Cement Castable
Vibrocast 60
Vibrocast 60
VIBROCAST 60 is a Mullite-Based, Low Cement, 60% Alumina castable that can be installed by vibration cast methods only.
Low Cement Castable
Vibrocast 60PC
Vibrocast 60PC
VIBROCAST 60PC is a Pumpable, Low Cement, 60% Alumina castable based on a mullite aggregate, that can be installed by vibration cast, pumping, and shotcreting methods.
Low Cement Castable
Vibrocast FS-6
Vibrocast FS-6
VIBROCAST FS-6 is a Low Cement, Fused Silica-based Castable that can be installed by vibration cast methods only. This product features excellent resistance to thermal cycling conditions.
Get a Quote